AMIRUDDIN KHAN

PAYROLL – NES FIRCROFT

PROJECT – PROJECT ONE – ETHANE CRACKER PROCESS UNITS

• Led and managed construction teams, including engineers, supervisors, and subcontractors.
• Oversaw piping and structural fabrications, installations, and pre-commissioning activities for Ethane cracker process units.
• Monitored construction and contractor deliverables to ensure compliance with schedules and budgets.
• Provided technical guidance, resolving construction challenges while maintaining engineering standards.
• Established work completion priorities and coordinated materials to align with project sequences.
• Collaborated with managers and engineers to discuss site queries and align construction goals.
• Enforced strict adherence to HSE standards during offshore operations across all activities.
• Enhanced project efficiency by overseeing construction processes.
• Provided technical advice on key decisions to enhance overall project performance.
• Worked closely with EPC contractor & subcontractors to ensure alignment with primary objectives and timelines.
• Ensured adherence to INEOS design specifications during all stages of construction.
• Motivated teams to deadline through regular site visits and inspections, problem-solving accordingly and eliminating bottlenecks.
• Monitored daily construction details and progress and supervising completion of test packages, final punch lists to Align with mechanical Completion dates.
• Visited sites to check project progress and eliminate bottlenecks.
• Monitored workmanship of subcontractors to ensure compliance with INEOS specifications and procedures.
• Promoted job site safety through management walk engagements, encouraging safe work practices and rectifying job site hazards immediately.
• Oversaw engineering Issues, Quality Control (QC) for construction teams, delivering results in line with project specifications.
• Prevented project delays through carefully considered risk and feasibility assessments.

• Lead the Work scope as per work packages released from Engineering for FPSO Topside Modules.
• Periodically attend meeting with Commercial for budget allocation, Manhours estimation for each activity & clearing issues related to cost.
• Attend meeting with Company & JV PMT Team to discuss the engineering clarification and engineering status - Technical Query (TQR), Piping Supports Document & Drawing Status (isometric drawings, P&ID’s, Piping GA’s etc., FIM & supply material status and Engineering Clarification / Proposal.
• Coordinate with fabricator and project team for the execution, Fabrication & installation work.
• Review drawings for constructability and identify any special items/subcontract requirements.
• Responsible for raising Work orders or materials requests to Subcontractors.
• Preparation of necessary document for additional claim/Site Instruction.
• Follow instructions & advice from Construction & Engineering Manager for resolving the engineering & Quality matters.
• Study and understand project spec, scope of work and scope of supply.
• Supervise project progress through periodic site visits ensure that work is carried out in accordance with (design and latest drawings). Also spot any deviations and advises contractors for proper rectification. Take corrective actions when necessary and ascertains completion of project documentation, upon projects completion.
• Ensure that subordinates are trained and knowledgeable of specifications and work procedures, to ensure optimum efficiency, and work is being performed in conformance with specified quality requirements.
• Establish a sequence of priority system for Work completion with related section, ensure work and materials are plan in accordance with the same sequence.
• Follow up Planning & Scheduling and Managing site construction activities and materials coordination & tracking.
• Responsible for the project execution, construction Plans & supervises the construction functions -Ensure the proper completion of the work on schedule with approved drawings, specifications, cost & quality limitations.
• Drove successful project implementation by liaising with other department heads.
• Identified potential challenges with strategic planning and proactive problem-solving approaches.
• oversee detailed project schedules, ensured timely completion of tasks.
• Takes necessary actions to maintain targets. Conducts subcontractor supervision meetings to review/assist in daily, weekly, and monthly planning.

• Supervised fabrication, installation, and testing of piping and structures for ADNOC LNG project.
• Studied project specifications and reviewed method statements to ensure compliance.
• Conducted meetings with subcontractors to address engineering clarifications and project status.
• Coordinated execution of piping and support fabrication with fabricators and project teams.
• Prepared documentation for additional claims and site instructions to subcontractors.
• Ensured subordinates were trained on specifications to maintain quality standards.
• Executed line checks to verify construction conformance with drawings and specifications.
• Managed scheduling of construction activities, including spool coordination and punch item tracking.
• Facilitated regular meetings for better communication amongst team members.
• Oversaw risk management activities to prevent delays or cost overruns.
• Provided technical advice on key decisions to enhance overall project performance.
• Worked closely with subcontractors to ensure alignment with primary objectives and timelines.
• Ensured adherence to design specifications during all stages of construction.
• Motivated teams to deadline through regular site visits and inspections, problem-solving accordingly and eliminating bottlenecks.
• Supervised site work to verify quality and safety standards ahead of sign off.
• Completed projects on time and within budget by collaborating with engineers, supervisors, project managers of contractors & Subcontractor.
• Oversaw Quality Control (QC) for construction teams, delivering results in line with project specifications.

• Front line responsibility for contractor’s HSE performance and ensures contractors is adhering to ADNOC’s safety requirements and policy.
• Attend and lead contractor’s safety meetings, Job safety analysis, safety stand downs, HAZID and various others safety related meetings.
• Conduct regular site visits and audits and ensure that the safety assurance program requirements are followed and implemented.
• Investigates and identifies constructability issues, as early as possible to attain appropriate solutions at the time of implementation. Identify in advance specific HSE critical aspects to be considered and assessed prior to implementation to ensure that the Construction work is carried out safely.
• Review and approves Inspection Test Plan (ITP) and ensures contractor adheres to project quality plan during construction phase.
• Participates in the scope of work reviews to ensure technical requirements and applicable policies and procedures are aligned in all phases of the project.
• Ensures the contractor is executing the construction scope as per the technical specification, scope of work, quality requirements and project schedule as defined in the contract documents.
• Attend daily/weekly/monthly meetings with contractor to review progress and schedule compliance and reviews submitted reports for accuracy.
• Responsible for completing construction and attaining ready for commissioning status
• Review and approves contractor’s Submittals (method statements, redline drawings Mechanical completion and Ready for commissioning dossiers…etc.) and ensure all submission are as per project requirements.
• Reviews in conjunction with engineering all Technical Queries submitted by the contractor.
• Ensures effective coordination between different departments, PMT and contractors within the construction site to facilitate safe work progress.
• Review materials approval requests provided by Contractor to ensure consistency with approved drawings and specifications and ensures that material received are as per project requirements and specifications.
• Review, verify and recommend progress payment of invoices during various stages of the project prior to the submission to the Seniors/Department Manager for the final approvals.
• Participates in technical evaluation of bids and provide construction input when required.
• Participates in review of project planning package and provide inputs to the planning engineer on the area of improvement, major risks and shortfalls in the schedule.
• Conducts final walk-down with end user and contractor to ensure proper handover of constructed facility and closure of open items.
• CLIENT: ADNOC REFINING
• CONTRACT HIRE – PAYROLL – PEC, ABU DHABI, UAE

• Supervised piping construction, including fabrication, installation, and testing.
• Monitored day-to-day welding and erection activities to ensure compliance with targets.
• Planned and managed site construction activities while coordinating spool tracking.
• Executed construction plans using available manpower and resources effectively.
• Facilitated contractor mobilisation to meet project targets and timelines.
• Identified material constraints and communicated issues to lead engineer promptly.
• Ensured deployment of safety stewards for secure execution of tasks.
• Conducted hydrostatic and pneumatic testing of piping systems before commissioning.
• Directed team to meet project objectives and maintain quality standards.
• Guided junior engineers, helped them develop their technical skills and understanding of industry practices.
• Assisted in the procurement process, ensured timely availability of materials on site.
• Provided technical advice on key decisions to enhance overall project performance.

CLIENT: QATAR SHELL GTL, QATAR (World’s largest GAS to liquid plant)

PROJECT: QATAR SHELL GTL MTA-2

• Responsible for accepting the Permit to start work (PTSW).
• Promoted a safe work environment by enforcing strict adherence to safety regulations.
• Conducting the Tool Box Talk meetings daily prior to start work.
• Performing Risk assessments prior to start every work.
• Supervise with all technical support for the site’s dismantling line and tie-in point.
• Provide technical assistance to the maintenance team in connection with effective maintenance of plant and equipment and In relation to plant breakdowns and modifications.
• Prepare the Inspection schedule in coordination with production Schedule
• Inspection of all incoming Materials.
• Supervising of Piping Support fabrication, and welding.
• Witnessing hydro testing of pipes spools, exchanger’s bundles after welding of joints & interaction with Quality control department.
• Comply with the QATAR SHELL GTL Quality standard & procedure.
• Provide back up to the Sr. Foreman for managing and handling projects including providing technical advice as required.
• Positively correcting unsafe actions during work at site.
• Empower sub-contractors and provide tools and technique including process improvement suggestions and follow up on implementation.
• Supervision of all piping and mechanical works during Pre-Commissioning & Commissioning and ensures safety and quality standards of the client.
• Leading a safe & reliable turnaround.
• Delegated tasks appropriately, achieved balanced workload among team members.

• Developed fabrication plan and strategies to optimize yard & Site equipment and resource utilization.
• Organized cutting, fabrication, and installation sequences based on engineering priorities.
• Created detailed completion programme with manpower loading for effective project management.
• Reviewed dimension control and fit-up inspection reports to ensure optimal welding fit.
• Coordinated work progress with project manager, owner’s representatives, and other trades.
• Generated manpower requests and target reports prepared by foreman or senior foreman.
• Provided comprehensive work done reports and field descriptions to invoices and estimators.
• Conducted HSEQ audits to identify hazards and ensure compliance with safe working practices.
• Resolved technical issues for seamless operations on the construction site.
• Collaborated effectively with design teams refining plans as per ground realities.
• Dealt with subcontractors negotiating favourable terms and conditions for contracts.
• Supervised site work to verify quality and safety standards ahead of sign off.