Summary
Overview
Work History
Education
Skills
Timeline
Generic
FERNANDO PENINSULA

FERNANDO PENINSULA

Electronic And Communication Engineer
Dubai,DU

Summary

Professional Summary


To seek and maintain full-time position that offers professional challenges utilizing interpersonal skills, excellent time management and problem-solving skills.

With success in creating designs and engineering plans to establish project specifications. Detail-oriented in assessing project objectives to determine the correct direction for project planning and technical drawings.

Overview

20
20
years of professional experience
5
5
years of post-secondary education

Work History

Senior Project Engineer

PPS Consultancy
Dubai
06.2017 - 06.2021
  • Coordination with different design discipline team, electrical and mechanical as necessary during design developments stage
  • Liaising with local authorities for design requirements and obtain approval of various design development stages
  • Responsible for reviewing the design and participate in design progress meetings and technical workshops with client and other design teams
  • Prepare project technical specifications in line with client project specs requirements
  • Carry out site inspections to verify contractor works if it is accordance to project design, approved shop drawings, method statements and project technical specifications, approved materials following authority regulatory standards for installation
  • Review tender documents, material submittal, shop drawing and other related documents submitted by contractor and provide technical feedback based on project requirements
  • Monitor site work progress of contractor during site implementation to ensure site work status is aligned with program of works milestone
  • Prepare and issue letter to contractor with regards to delay of works, Non conformance at site and other related issues which is non compliance to contractual obligation of contractors.
  • Reviewed contractor proposals to determine favorable partnerships for on-time and under-budget project completion.
  • Developed accurate technical drawings to direct successful engineering projects.
  • Calculated risks during project development and managed risks throughout projects.
  • Assessed scope and requirements to assist with project design determinations.
  • Oversaw worksite construction to coordinate with supervisors and guide projects.
  • Managed projects effectively to deliver finished work on time.
  • Liaised with company executives and project managers to acquire resources to move projects forward.
  • Performed constructability reviews of construction bid documents for coordination purposes.
  • Assessed impact of modification requests for ongoing projects.
  • Provided technical direction of system development methodologies to improve technical performance.
  • Planned and managed engineering projects and continuous improvement programs to reduce labor and costs.
  • Determined and scheduled priorities as required to progress engineering work.
  • Evaluated change order requests in response to out-of-scope work activities.
  • Assisted with cost proposal development and customer presentations.
  • Reviewed progress controls for project quality assurance.
  • Identified technical risks within managed projects.
  • Monitored metrics during project execution to maintain compliance with planned costs.
  • Maintained records for each project and engineering discipline.
  • Delivered regular compliance reports to drive process improvement and corrective measures.
  • Monitored installation of materials and equipment for compliance with drawings and specifications.
  • Completed construction tasks while providing safe working conditions, staying on budget and meeting project deadlines.
  • Evaluated sites to determine soil adequacy for handling building foundation loads.

Electrical Supervisor

IMECO
Abu Dhabi, UAE
08.2016 - 05.2017
  • Review ensures quality Electrical/ELV engineering drawings and refers issues requiring changes
  • Plans, promotes implements, supervises, and coordinates activities of a team of workers to perform on-site electrical work
  • Monitor site work progress targeted schedule and report on job status and task completion,
  • Recommend effective solutions specified particular weight related to employment status of employees
  • Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects
  • Plan and prepare work and equipment usage schedules
  • Develop electrical expenditures priority and equipment and appliance maintenance procedures
  • Develop electrical material and labor forecasts
  • Train and inform employees about new work procedures
  • Provide information on modification on work policies, safety regulations, electrical codes and specifications
  • Initiating prompt and effective Corrective Action while notifying line management of the potential health and safety & environmental hazards
  • Inspect new-fangled construction along with remodels
  • Monitored manufacturing operations of electrical devices for compliance with safety protocols.
  • Mentored junior engineers and new hires in job-specific tasks and application of electrical processes.
  • Supervised and evaluated installation and repair of lights and power in buildings and facilities.
  • Analyzed complex technical problems, determined solutions and made sound decisions.
  • Supervised, trained and evaluated electrical and mechanical engineering staff.
  • Estimated dollars and materials for department work orders.
  • Coordinated electrical system maintenance and repair with other departments, outside agencies and public utilities.
  • Prepared and analyzed complex reports of general or technical nature.
  • Evaluated final results to determine quality levels and isolate root causes of any identified faults.
  • Monitored safety compliance to maintain strict standards and protect team members from harm.
  • Optimized supply levels to keep stock within ideal parameters for expected needs.
  • Reviewed and studied blueprints to double-check installation and implementation project requirements.
  • Kept watchful eye on equipment inventories, optimizing work readiness and aligning supplies with specifications for each job.
  • Monitored systems to assure increase in power flow and integrated new system components, fixtures and motors.
  • Monitored equipment, tools and system upgrades to compile data into detailed reports for upper management.
  • Contributed to development, implementation and execution of maintenance programs.

Maintenance Supervisor

STSCC, Saudi Technology and Security Comprehensive Control
Riyadh , Saudi Arabia
10.2013 - 08.2016
  • To provide day to day hands-on supervision on a shift basis of maintenance staff in both workshop and field support and ensure sufficient, clean, safe and defect- free component and available for service in the line with Company Regulatory
  • Standards Statutory guidelines, deadlines and requirements
  • To ensure all defective camera assembly, component is tested/repaired and resolved in a timely manner
  • To act as a technical expert in the workshop and field works, advising and trained staff on tasks and sharing knowledge through regular repair talk
  • To ensure that there is Camera module assembly ready to deploy in a day-to-day need by Operation
  • To implement management decision base on the WO need to complete the job order
  • Responsible for the inventory of the parts/component to ensure enough supply to be use on daily workshop needs
  • Initiating prompt and effective Corrective Action while notifying line management of the potential health and safety & environmental hazards
  • Assist in manpower and resource scheduling and deployment and coordinate in all site issues
  • Maintaining Enforcement Poliscan System originated from Vitronic (Fixed Speed
  • Measuring device Camera) pertaining to LIDAR technology
  • Monitor Red light enforcement systems from ACS Xerox Inc
  • Pertaining to Sensys
  • Technology
  • Responsible for inventory of spare parts component to ensure enough supply to be use on daily workshop needs.
  • Monitored employee work tasks while installing, aligning and balancing new equipment for projects.
  • Adjusted machine settings to maximize performance and equipment longevity.
  • Increased productivity by reducing downtime, budgeting effectively, allocating tasks and maintaining high standards of safety and work quality.
  • Procured pricing information from various vendors to support cost-effective purchasing.
  • Reviewed and studied schematic diagrams to properly plan and process assignments.
  • Tested systems to enhance power flow and safely install new system components, fixtures and motors.
  • Analyzed and identified equipment failure root causes and initiated correction actions.
  • Paid close attention to guidelines, specifications and detailed instructions to continuously adhere to strict operational and maintenance regulations.
  • Observed guidelines, specifications and detailed instructions to meet strict operational and maintenance regulations.
  • Kept track of equipment, inventories and system upgrades in order to prepare and present detailed reports to upper management.
  • Contributed to development, implementation and execution of maintenance programs.
  • Kept watchful eye on equipment inventories, optimizing work readiness and aligning supplies with specifications for each job.
  • Monitored priorities and liaised between maintenance team and management, delegating tasks to complete on time.
  • Monitored equipment, tools and system upgrades to compile data into detailed reports for upper management.
  • Implemented scheduled maintenance, retooling production status sheets and driving Number tasks to achieve scheduling effectiveness.

Manufacturing Equipment Engineer

LEXMARK INTERNATIONAL PHILIPPINES INCORPORATED
Basak, Lapu-Lapu City, Cebu, Philippines
06.2009 - 10.2012
  • Provide effective repair and troubleshooting to improve up-time performance related to Equipment’s, Materials, Hardware design, Software and other which is contributed to manufacturing process
  • Perform full system testing and integration for both equipment and product
  • Perform equipment test run and quality control on process product after attending equipment issue to make sure the equipment is producing good quality product prior endorse to production user for mass production
  • Prepare production process flow, test methods for newly installed testing equipment/device for validation, and disseminate to production end user
  • Conduct test run system analysis and debugging of new product, material and equipment prior to acceptance
  • Preform functional testing of equipment components, Electrical/Electronic and
  • Mechanical elements prior to acceptance
  • Perform functional test of output product for the newly installed production equipment before handed over to production
  • Assist Quality Engineer in implementing improvements in production related to equipment’s and product test methods and strategies
  • Provide training to engineers and manufacturing technicians on machine operations test methods and maintenance
  • Conduct regular audit on assigned equipment to ensure operation efficiency and safety
  • Perform regular preventive maintenance activities and motoring of machine set up of assigned equipment for optimum performance and safety
  • Interface with service providers on matters related to equipment maintenance and performance enhancement
  • Review spare parts and consumables usage and availability to contribute to team have cost reduction effort
  • Participate in CFT to improve and practice on problem solving and trouble shooting skills
  • Maintain and monitor equipment during operation to ensure all safety guidelines and devices and working property and not altered by end user operator
  • Developed and maintained courteous and effective working relationships.
  • Used critical thinking to break down problems, evaluate solutions and make decisions.
  • Learned new skills and applied to daily tasks to improve efficiency and productivity.
  • Improved operations through consistent hard work and dedication.
  • Onboarded new temps by entering employee information into systems.
  • Adhered to social distancing protocols and wore mask or face shield.
  • Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.
  • Conducted research, gathered information from multiple sources and presented results.
  • Worked flexible hours across night, weekend and holiday shifts.
  • Devoted special emphasis to punctuality and worked to maintain outstanding attendance record.
  • Developed and implemented performance improvement strategies and plans to promote continuous improvement.
  • Led projects and analyzed data to identify opportunities for improvement.
  • Used coordination and planning skills to achieve results according to schedule.
  • Completed paperwork, recognizing discrepancies and promptly addressing for resolution.

Equipment Technician

LEXMARK INTERNATIONAL PHILIPPINES INCORPORATED, MEPZ
Basak, Lapu-Lapu City, Philippines
01.2000 - 06.2009
  • Conduct regular inspection on assigned equipment to ensure operation efficiency and safety
  • Maintain and monitor equipment during operation to ensure all safety guidelines and devices and working properly and not altered by end user operator
  • Provide effective response to equipment issues requiring repair and troubleshooting to improve equipment up-time performance
  • Attend equipment failure to achieve target up time
  • Support to equipment engineer any activities to manufacturing by ensuring high equipment effectiveness and availability
  • Perform regular preventive maintenance activities and monitoring of machine set- up of assigned by equipment engineer for optimum performance and safety
  • Assist to engineer in implementing yield and cost reduction projects for equipment spare parts
  • Participate in CFT to improve and practice on problem solving and trouble shooting skills
  • Actively participate in LIPI drive for continuous improvement in all its business processes
  • Assist to engineers in conducting regular audit on assigned equipment to ensure operation efficiency and safety.
  • Troubleshot equipment failures and remedied problems to restore functionality.
  • Performed frequent inspections of company equipment and corrected malfunctioning equipment.
  • Assembled, tested and maintained company equipment Number pieces of equipment on weekly basis.
  • Evaluated facilities equipment and interpreted data.
  • Maintained documentation of equipment maintenance tasks, new installations and repair procedures.
  • Understood and read technical manuals and blueprints.
  • Repaired or replaced defective parts using hand tools, milling and woodworking machines and power tools.
  • Tested and replaced electrical components and wiring using test meters, soldering equipment and hand tools.
  • Calculated bills according to record of repairs made, labor time and parts used.
  • Complied with company policies, safety requirements and best practices to protect people, equipment and operations.
  • Used operational manuals, maintenance records and forums to gain troubleshooting insight for complex issues.
  • Acquired hand and power tool mastery to carry out routine and advanced repairs.
  • Assessed machinery in need of repair, identified issues and implemented corrective actions to achieve quick resolution and return to service.
  • Maintained and repaired farm machinery, systems and vehicles to keep operations smooth and efficient.
  • Documented and filed records of repair work and maintenance for accurate tracking of labor hours, inventory use and equipment histories.
  • Analyzed machinery and tested electrical systems and wiring to identify faults and resolve issues impeding performance.
  • Conducted research, gathered information from multiple sources and presented results.
  • Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.
  • Resolved conflicts and negotiated mutually beneficial agreements between parties.

Education

Bachelors - Electronics And Communications Engineering

University of San Jose Recoletos
Cebu
01.2004 - 01.2009

Skills

Site management

undefined

Timeline

Senior Project Engineer

PPS Consultancy
06.2017 - 06.2021

Electrical Supervisor

IMECO
08.2016 - 05.2017

Maintenance Supervisor

STSCC, Saudi Technology and Security Comprehensive Control
10.2013 - 08.2016

Manufacturing Equipment Engineer

LEXMARK INTERNATIONAL PHILIPPINES INCORPORATED
06.2009 - 10.2012

Bachelors - Electronics And Communications Engineering

University of San Jose Recoletos
01.2004 - 01.2009

Equipment Technician

LEXMARK INTERNATIONAL PHILIPPINES INCORPORATED, MEPZ
01.2000 - 06.2009

Similar Profiles

CREATE PROFILE
FERNANDO PENINSULAElectronic And Communication Engineer