JOBERT K R
Summary
Certified inspector with over 13 years of experience in the Oil and Gas industry, specializing in construction, turnaround, and third-party inspection (TPI) activities. Proven track record of delivering high-quality results for major projects with industry leaders such as Saudi Aramco, Shell, and ADNOC. Expertise in international codes and standards enhances operational compliance and safety. Committed to leveraging extensive knowledge to contribute to future projects and ensure excellence in inspection processes.
Overview
21
21
years of professional experience
1
1
Certificate
Work History
Multi Discipline Inspector (Welding /Coating/Valve Testing)
TUV Rheinland Middle East
Abu Dhabi
12.2022 - 12.2024
- Attending several material inspections at different vendors' works, and attending PIM as required by the client.
- The following are the activities carried out:
- PQR/WPS/WQT Qualification.
- Conducted detailed inspections to verify weld quality on pipe spools.
- Painting and coating inspection.
- Valves Inspection and Testing.
- Pressure vessel fabrication, welding, and hydrotest inspection.
- Executed inspections on both TSA and 3LP coating applications.
- Mechanical Bulk Material Inspections.
- Witness laboratory testing for WPS qualification and 3.2 certification, including tensile, impact, macro, hardness, and bend tests.
- Pre-Shipment Inspection (PSI).
- High-pressure test/Fugitive emission test for valves.
- Measurement of dry film thickness (DFT) to confirm compliance with specified coating requirements.
- Positive Material Identification (PMI), Penetrant Testing (PT), and Magnetic Particle Inspection (MPI) witnessing, and report review.
- Monitored the assembly process of the packer, ensuring adherence to approved procedures and technical requirements.
- Witnessed drift testing to confirm that the internal dimensions of components met tolerance requirements and were obstruction-free.
- Verification of equipment functionality (FAT), including pump run performance, noise levels, and vibration compliance under specified operating conditions.
- Capable of assessing MTC, Procedure, and Inspection Test Plans.
Mechanical Inspector (Welding/Painting)
INTIME ENGINEERING SERVICES LLC
Ajman
06.2022 - 10.2022
- Verification of the tank's integrity by performing water fill tests to identify any leakage.
- Pressure testing of skid piping spools to ensure they meet the required standards and design pressure.
- Responsible for inspecting incoming coating and painting materials.
- Checks and records atmospheric conditions prior to the start of painting operations.
- Carries out wet and dry film thickness checks.
- Assessment of surface preparation and coating application, including adhesion, coverage, surface finish, salt contamination (Bresle Patch), and surface profile tests.
- Performs the assessment of the quantity of dust particles on the surface using the Elecometer 142 Dust Tape Test Kit as per ISO 8502-3.
- Conduct daily toolbox talks with painting personnel.
- Prepare all necessary QA/QC painting and coating documents for the client's review.
Flange Integrity Inspector
ORYX GTL
Qatar
02.2022 - 03.2022
- Maintain & implement Project Quality Plans, Quality Strategies, and Objectives
- Pre-visual Inspection of all equipment whichever is opened (like pressure vessels, Heat Exchangers, Fin fans etc.)
- To verify the Flange face are clean and bolts are lubricated before box up
- Witness the De spading activity for flange face inspection and Bolt torqueing/Tensioning inspection as per flange tightening protocol
- Verify the flange joint assembly prior to bolt tightening
- Maintain the bolted Flange joint assembly control sheet
- Verify the Flange alignment (radial, angular)
Flawless QA/QC inspector
Madina Group WLL
Qatar
12.2021 - 02.2022
- Incoming material inspection
- Inspection after Cleaning / Chemical Cleaning, &list out the repair activities in accordance with procedures and standards
- Inspection after repair in Heat Exchangers like Tube, Tube sheet change, Ferrule Inspection, Plugging, and Seal welding of tubes
- Cop up with NDE Team for IRIS inspection and NFET inspection for Fin fan tubes
- Witness the De spading activity for flange face inspection and Bolt torqueing/Tensioning inspection as per flange tightening protocol
- After tensioning, break loose pressure (BLP) verification according to Bolt tensioning procedure
- Witness the Hydro test shell &Tube sides etc, post hydro Dewatering and drying using compressed air
- Post cleaning inspection and box up
QA/QC Engineer- Welding/Piping
APC (Atlantic projects Company) UK Ltd
Teesside
12.2019 - 03.2020
- Inspect the piping to ensure all installed pipes/fittings are in accordance to the project specification and the materials used are in accordance with the specified material traceability requirements
- Conduct inspection of piping as per PID/isometric drawing and raise the punches (A/B) in punch list
- To verify the installation of valves and instruments including orientation verification incorporate with Isometric drawing & P&ID
- Co-ordinate with other Departments, Client and sub-Contractors for the smooth functioning of QA/QC activities
- Document reviewing and final submission to client to get approval
- Regular reporting of inspection status
QA/QC Inspector - (Welding/Painting)
Si Tec- Centrotherm GmbH
Alkhor
05.2015 - 11.2019
- Review of SOP (standard operation procedure), method statements and test packages
- Monitoring of welding consumables as per issuing and baking register
- Reporting to QC manager of welding activities
- Issuing Non-conformance report if there is any deviation from procedures, codes or standard
- Co-Ordinate with Project supervisor on quality deficiencies and non-conformances to prepare corrective and preventive action plan
- Boroscope inspection for discolouration of weld root for stainless steel piping (SS316/1.4401) and line cleanliness for pre commission activity
- Inspection of gaskets, supports, valves prior to line reinstatement acceptance as per the latest drawing for construction, codes and specification standards
- Conduct inspection of piping as per PID/isometric drawing and raise the punches (A/B) in punch list
- Witness Hydrostatic /pneumatic pressure test of piping system
- After pressure test, witness the lay-up and post-test re-instatement activities as per commissioning requirement
WELDING INSPECTOR
SAMSUNG ENGINEERING
Al jubail
06.2013 - 06.2014
- Verifying that adequate and valid welder approvals are available, and that only approved welders are used in production
- Dimension inspection of fabricated items for conformity with drawings
- Verifying parent material against documentation and markings
- Verification that dimensions, fit-up and weld preparations are in accordance with specifications
- Responsible for updating daily activities such as RFI, SAIC (Saudi Aramco check list), SATR (Saudi Aramco test report)
- Using QMS (Quality Management system)
- Control NCRs to be closed out within the due date and supporting to prepare Corrective Action Plan properly
- Line checking, Re-instatement and preparation of test packages
- Coordinate test pack related activities
- Witness visual welding inspection and monitoring of welding works as per WPS/Input the data in to FMCS Software for updating
- Ensure that all operations are carried out in complete compliance with company, or national safety legislation (i.e
- Permits to work are in place)
WELDING INSPECTOR
AL-MASHARIQ TRADING& CONTRACTING
Riyadh
02.2012 - 02.2013
- Marking and checking field weld joints on isometric
- Inspection of receiving materials for quality assurance if complies with the client standard specification
- Monitored welder performance, maintained welder register and weld repair rate
- Scheduled and prepared NDT request for visually accepted joints to cope up with the NDT percentage requirement as per line class
- To Conduct Fit up inspection on Pipe line as per Project QCP, Customer Specification and International Standards to provide technical guidance for welding sequence and distortion control
- Execution of Excavation procedure, for repairs
- Verify welding qualification and ensure that only qualified welders are used in production
- Coordination with clients on all QA/QC activities as per the ITP and inspection Checklist
QCI-WELDING/PIPING
MOHAMMAD AL MOJIL GROUP (M.M.G)
Aljubail
10.2007 - 11.2011
- Ensured that all inspection records, Quality documents and relevant project documents are maintained and achieved according to project execution plan
- Review work packages to ensure complete understanding of work scope prior to commencing work
- Inform QA/QC Manager on quality related items
- Proper inspection and reporting of materials as per Quality Manual and Owner Specifications
- Visual inspection of both structural and process piping welds on daily basis
- Reviewed project specifications, P&ID, plans and isometric drawings
- Witnessed proper installation of valves, steam traps, bellows, permanent gaskets and removal of temporary supports
- Implementation of approved procedures (WPS & PQR) and maintaining quality records as per quality management system requirements (QMIS)
- Prepare inspection reports, NCR, technical queries, weekly QA/QC reports and monthly
- Issue Punch List and follow-up
Site In Charge
TEAM (Turbine Erection and maintenance) services
Jodhpur
07.2006 - 05.2007
- Fabrication Supervision: The stage wise inspection for fabrication activities, fit-up, alignment & welding etc
- As per isometric drawing, installation of the fabricated pipe spools as per general arrangement drawing (GAD), piping and instrumentation drawing (P&ID) and structural work
- Site assistance, monitoring, Quality Control and Material Procurement
- Daily progress report follows up
- Prepare the one week look ahead schedule
- Responsible for the complete Fabrication, Erection, welding & Testing of all the piping systems
- Identification of Piping Loops & maintaining loop file records for NDT, Hydro testing, Mechanical Clearance and Final Box Up
Junior Engineer
TEAM (Turbine Erection And maintenance) services
Nagpur
01.2004 - 06.2006
- Provided support to piping engineer
- Assisted multiple engineers on several areas to complete the assigned task
- Daily progress report updating and mail to client supervisor
- Maintains project schedule by monitoring project progress; coordinating activities; resolving problems
- Studying and checking of P&Id's and Isometrics of drawings and fabricating accordingly
- Supervision of fit-up as per drawing
Education
Mechanical Engineering - AMIIE
Indian Institution of Engineers
06.2006
Diploma - Mechanical Engineering
Govt. Polytechnic M.T.I
03.2002
Accomplishments
- Saudi Aramco Approval (Welding)
- ADNOC Approval (Multi Inspector)
Languages
Malayalam
First Language
Hindi
Intermediate (B1)
B1
English
Intermediate (B1)
B1
Certification
- Certified Senior welding inspector with RTFI (CSWIP 3.2.2) TWI-United Kingdom - Certificate No. 434148
- Certified painting inspector Bgas Grade 2 (11/2019 - 11/2024) TWI-United Kingdom - Certificate No. 93659/2
- Certified ASNT Level II inspector in UT/MPT/RT AND PT. (12/2008 - 12/2028)
- Quality Management system (QMS) Lead auditor (ISO 9001- 2015) CQI-IRCA CERTIFIED.
Timeline
Multi Discipline Inspector (Welding /Coating/Valve Testing)
TUV Rheinland Middle East
12.2022 - 12.2024
Mechanical Inspector (Welding/Painting)
INTIME ENGINEERING SERVICES LLC
06.2022 - 10.2022
Flange Integrity Inspector
ORYX GTL
02.2022 - 03.2022
Flawless QA/QC inspector
Madina Group WLL
12.2021 - 02.2022
QA/QC Engineer- Welding/Piping
APC (Atlantic projects Company) UK Ltd
12.2019 - 03.2020
QA/QC Inspector - (Welding/Painting)
Si Tec- Centrotherm GmbH
05.2015 - 11.2019
WELDING INSPECTOR
SAMSUNG ENGINEERING
06.2013 - 06.2014
WELDING INSPECTOR
AL-MASHARIQ TRADING& CONTRACTING
02.2012 - 02.2013
QCI-WELDING/PIPING
MOHAMMAD AL MOJIL GROUP (M.M.G)
10.2007 - 11.2011
Site In Charge
TEAM (Turbine Erection and maintenance) services
07.2006 - 05.2007
Junior Engineer
TEAM (Turbine Erection And maintenance) services
01.2004 - 06.2006
Mechanical Engineering - AMIIE
Indian Institution of Engineers
Diploma - Mechanical Engineering
Govt. Polytechnic M.T.I
Personal Information
- Date of Birth: 10/26/81
- Driving License: Yes (Own Vehicle)
Additional Qualifications
- Certified Senior welding inspector with RTFI (CSWIP 3.2.2), TWI-United Kingdom, 434148
- Certified painting inspector Bgas Grade 2, TWI-United Kingdom, 93659/2, 11/01/19, 11/01/24
- Certified ASNT Level II inspector in UT/MPT/RT AND PT, ASNT, 12/01/08, 12/01/28
- Quality Management system (QMS) Lead auditor (ISO 9001:2015), CQI-IRCA CERTIFIED
References
References available upon request.
Languages
- English, Professional Working Proficiency
- Hindi, Full Professional Proficiency
- Malayalam, Full Professional Proficiency
Additional Qualifications
Training: API 598 Clauses II Valves Inspection & Testing (Udemy)
Personal Information
- Date of Birth: 10/26/81
- Driving License: Yes (Own Vehicle)
References
References available upon request.
Similar Profiles
Manoj KumarManoj Kumar
Global Business Manager at TUV Rheinland Middle East FZEGlobal Business Manager at TUV Rheinland Middle East FZE
MUHAMMED MEETHALE PANTHOKKALILMUHAMMED MEETHALE PANTHOKKALIL
Accounts Receivable Accountant at TUV (Nord) Middle East WLLAccounts Receivable Accountant at TUV (Nord) Middle East WLL
Godwin AshikemGodwin Ashikem
Section Head at TUV SUD Middle EastSection Head at TUV SUD Middle East
Nandha KumarNandha Kumar
Multi Discipline Inspector- Mechanical & Coating at STS OMANMulti Discipline Inspector- Mechanical & Coating at STS OMAN
KISHORE KUMAR BATHULAKISHORE KUMAR BATHULA
MULTI DISCIPLINE INSPECTOR -WELDING/GRE at GULF PETROCHEMICAL SERVICES LLCMULTI DISCIPLINE INSPECTOR -WELDING/GRE at GULF PETROCHEMICAL SERVICES LLC