Joel Adamah
Abu Dhabi
Summary
Seasoned Power Engineer offering excellent technical acumen, planning abilities and complex problem-solving expertise gained during 10-years career in the oil and gas industry. Led safe startups, track power needs and adjust output to align with demand. Seek to bring knowledge and abilities to new role with room for advancement.
Overview
21
21
years of professional experience
Work History
Power Plant Engineer
Adnoc Gas Processing
12.2012 - Current
- Ensure all process equipment such as compressors, steam turbine, generators, heat exchangers, boilers, motors, and pumps and starter panels are maintained operated in a safe manner.
- Process equipment commissioning and troubleshooting
- Site safety officer in charge of supervising contractors and affiliate technical jobs
- Communication between field operations and distributed control systems (DCS operations)
- Plant shutdown and start-up operations.
- Completing KPI targets for all equipment
- Monitor and inspect plant equipment, computer terminals, switches, valves, gauges, alarms, gauges, and other instruments to measure temperature, pressure, and fuel flow to detect leaks or other equipment malfunctions and to ensure plant equipment is operating at maximum efficiency
- Analyze and record instrument readings and equipment malfunctions
- Troubleshoot and perform corrective action and minor repairs to prevent equipment or system failure
- Respond to emergency situations in a safe manner.
- Established effective communication channels among team members, fostering collaboration towards shared goals in power engineering projects.
- Enhanced power plant efficiency by implementing advanced control systems and optimizing equipment performance.
- Ensured safety compliance through regular audits, employee training, and adherence to safety regulations.
- Reduced maintenance downtime by conducting thorough inspections, identifying potential issues, and addressing them proactively.
- Conducted root cause analysis on system failures to identify areas for improvement in power plant operations.
- Responded immediately to emergency situations and implemented proper procedures to minimize impacts.
- Clean and lubricate generators, turbines, pumps, and compressors and perform other routine equipment maintenance duties using appropriate lubricants and hand, power, and precision tools
- Maintain a daily log of operation, maintenance, and safety activities, and write reports on plant operation and non-compliance
- Enhanced safety standards within the facility by updating operational procedures and conducting regular safety audits.
- Collaborated with interdisciplinary teams to develop innovative solutions for complex engineering challenges in power generation systems.
Plant Process Operator
Tema Oil Refinery
12.2005 - 12.2012
- To execute plant start-up, normal or emergency shutdowns
- Operating Compressors, Furnaces, Distillation Columns, Desalter, and Heat exchangers, Pumps, Valves, Vessels, etc
- To check process parameters and coordinate with the panel operator to correct any deviations
- To prepare the plant/equipment for maintenance ensuring adherence to safety standards
- To follow all standard operating procedures and instructions so that work is carried out in a safe manner
- DCS Operations for production of on-spec products
- Analyzing Lab reports, and adjusting plant operating parameters to meet specifications
- Inspect and collect technical data, and record instrument readings of pressure, temperature, volume, etc
- On columns, vessels, and heat exchangers, etc
- To ensure proper functioning
- Of plant equipment like furnace burner assembly, pump suction filters, and motors
- Follow job safety procedures at all times
- Writing of daily logs of the Plants activities and submitting them to management state of equipment and for reliever's information.
- Contributed to a safe working environment by strictly adhering to safety guidelines and reporting potential hazards.
- Utilized computer systems effectively to monitor processes and input critical data accurately and efficiently.
Rov Pilot Tech
Subsea7 Uk Ltd
10.2010 - 11.2012
- Launch and Recovery of the Remote Operated Vehicle System
- ROV control, navigational, and propulsion systems maintenance
- Ensuring that the ROV and all systems are in complete working order and in compliance with all technical requirements throughout the contract period
- Carrying out the dives in accordance with recognized operating procedures in order to carry out designated work safely and efficiently
- Undertake navigation and observersʼ duties and operation of manipulators and ancillary equipment fitted to the ROV
- To ensure that prior to any dive the submersible pre-dive checks have been completed
- Check with the submersible engineer on the status of the vehicle buoyancy, special fits, or any limitations to the system
- On completion of the dive immediately inform the ROV Supervisor / Senior Site Representative and Submersible Technician of any faults or deficiencies encountered during the period of the dive
- Ensure that the dive log is completed in full for the dive undertaken
- Undertake maintenance and repair of the ROV Electrical and Hydraulic system
- Carry out a risk assessment for all dives.
- Increased dive safety by consistently performing thorough pre-dive inspections and addressing potential issues.
- Demonstrated exceptional teamwork abilities through collaboration with fellow pilots, deck personnel, and other professionals in providing seamless service for clients.
Marine Electrical Tech.
Islamic Republic of Iran Shipping Lines
04.2003 - 08.2005
- In charge of Maintenance of all Electrical /Hydraulic machinery. Line winches and cranes.
- Read/Interpret drawings, schematics, blueprints, and marine electrical code to determine the layout and installation of electrical equipment.
- Install, examine, replace, or repair electrical equipment, wiring, switch boxes, cables, lighting, or other electrical equipment
- Test electrical or electronic equipment/components for continuity, voltage, and Insulation resistance.
- Maintain, test switchgear, transformers, and regulators
- Maintain, repair, install, and test motors, generators, alternators, batteries, and control systems
- Conduct preventive maintenance and maintain records
- Maintenance of emergency battery systems 12/24volt DC systems and 120/240volt AC electrical systems
- Ability to multitask, and work safely in sometimes congested and unconventional spaces.
- Ability to continuously learn new practices, techniques, and applications
- Demonstrated attention to detail on the job.
- Strong communication skills and interpersonal skills demonstrated within a team environment.
- Self-motivated, with a strong sense of personal responsibility.
- Worked effectively in fast-paced environments.
Education
ROV Maintenance and Simulator Training -
Subsea 7 Training School Aberdeen
07.2023
Heat Exchangers, Vessels and Columns -
Adnoc Gas Processing
Adnoc Technical Academy09.2020
Nebosh International General Certificate -
NEBOSH, UK
08.2014
Bsc. Electrical Electronic Engineering -
Regional Maritime University
10.2009
Higher National Diploma Electrical/Electronic Eng. -
Regional Maritime Academy
06.2000
Advance Level Certificate -
Adisadel College
06.1996
Skills
- Troubleshooting Skills
- Preventive Maintenance
- Leadership Skills
- Communication Skills
- Work Management System/Permit to Work
- SAP work Management System
- Boiler Operations
- Power generation systems
- Steam Turbine Knowledge
- Plant Operations Management
- Power Distribution
- Lockout and tagout procedures
- Safety reporting
Personal Information
- Place of Birth: Accra
- Date of Birth: 08/05/1974
- Gender: Male
- Nationality: Ghanaian
- Marital Status: Married
References
- Mr. Maxwell Osei Owusu, +96893663862, Tema Oil Refinery
- Capt. E. K Botchway, +233 24 4607 669, Regional Maritime University
- Subin Mani, 00971569763801, Adnoc Gas Processing
Hobbies and Interests
Reading, Travelling, Home Care, Listening to Music
Timeline
Power Plant Engineer
Adnoc Gas Processing
12.2012 - Current
Rov Pilot Tech
Subsea7 Uk Ltd
10.2010 - 11.2012
Plant Process Operator
Tema Oil Refinery
12.2005 - 12.2012
Marine Electrical Tech.
Islamic Republic of Iran Shipping Lines
04.2003 - 08.2005
ROV Maintenance and Simulator Training -
Subsea 7 Training School Aberdeen
Heat Exchangers, Vessels and Columns -
Adnoc Gas Processing
Nebosh International General Certificate -
NEBOSH, UK
Bsc. Electrical Electronic Engineering -
Regional Maritime University
Higher National Diploma Electrical/Electronic Eng. -
Regional Maritime Academy
Advance Level Certificate -
Adisadel College
Similar Profiles
DANISH EKRAMDANISH EKRAM
Instrument Engineer – Commissioning & Start-up at SPIE OIL & GAS, ADNOC GAS PROCESSINGInstrument Engineer – Commissioning & Start-up at SPIE OIL & GAS, ADNOC GAS PROCESSING
Ahmed AlbloshiAhmed Albloshi
Adnoc Gas at ADNOC Gas ProcessingAdnoc Gas at ADNOC Gas Processing
Husam Al SayedHusam Al Sayed
Marine Operator at ADNOC Gas Processing, Wescon InternationalMarine Operator at ADNOC Gas Processing, Wescon International