MOSEAF ALSHOUFi

It’s been long time accumulating education, experience and knowledge and blending them together to reach the perfect key for fabulous prosper results in my career and for the people who trust me.

I am always concerned about doing the right thing in the right way, and that is why I am always trying to have things done based on my education and technological background, and developing my technical skills continuously with a non-stop spirit.

My technological background is basically in Electrical engineering, department of electronics and telecommunications as a bachelor degree, which I supported it by studying a master degree in web technology that opened a wide door for me in programming and web based science, and to make things more efficient, a doctorate in business administration, specialization of project and quality management is under processing.

Throughout my career, I have earned the trust from several national and international companies and maintained strong relationships in my industry, and always, I love to work in a fair workplace where my work has value and will be appreciated which encourages me and pushes me to give more and more to the business that I am working for.

• UAE Driving License (Abu Dhabi)
• Residence Visa (Abu Dhabi)
• Experience certificates from four contracting companies
• Nomination letters from two consulting companies (CH2M HILL and Parsons)
• ICDL Completion Course Certificate
• Recommendation letters from three Syrian professors
• Basic First Aid and Fire Fighting Training Certificates
• Certificate of Training on the Radio Detection Cable and Pipe Locators
• Competency Certificate from ADWEA, ADDC, HSEQ
• Android Development Track Certificate from Udacity
• CCA (Cambridge Certification Authority) - Certificate - Java Level 1
• Java, JavaScript, and Python3 Certificates from SoloLearn

• FEWA Approved Senior Electrical Engineer
• SEWA Approved Electrical Engineer
• ADDC Competent Person
• DEWA/DM Approved Electrical Engineer
• SOE member in Dubai
• Engineers Syndicate in Syria

• CAD software – AutoCAD for drawing layouts and wiring diagrams
• Simulation software – MATLAB and PSpice for circuit simulation
• Programming – C, Python and PLC for embedded systems
• Power System Analysis – ETAP for electrical grids
• Microsoft Office – reporting and documentation
• Dialux – for lighting calculations and design
• Primavera – for project scheduling
• Testing, calibration, and measurement tools – such as oscilloscopes, multimeters, Metrawatt, clamp meters and insulation testers

• MTB project (Zayed International Airport), Smiths Detection, Project Electrical Engineer
• STEP (Strategic Tunnel Enhancement Program) Link Sewer, Ed. ZUBLIN AG, Liaison Engineer.
• Al Falah Villas, ELMECH, Design Electrical Engineer
• Al Reem Island for Sky and Gate Towers projects, ACC (Arabian Construction Company), Low Current Engineer
• Al-Reef Villas, FIBREX CO., Site Electrical Engineer

• Date of Birth: 07/26/83
• Nationality: Syrian
• Marital Status: Married

• English, fluent
• Arabic, native
• German, beginner

• Appreciation letters from two contracting companies, ED ZÜBLIN AG & Samar Electrical Contracting
• Star Award from Smiths Detection
• Smith's Got Talent (1st place in the first season, 3rd place in the second season, and 2nd place in the third season)

• Attended technical training on HiTraX, HS 7555, aTiX, and HS 6040C
• Conducted operating training on CXS, RadSeeker, and MS COMPACT
• I attended IONSCAN 600 technical training
• I attended IONSCAN 500DT technical training
• Attended technical training on EDS machines
• Attended technical training on XCT machines
• Attended technical training on HMC and Windows Matrix Server

• Circuit Design and Analysis: Understanding and Designing AC/DC Electrical Circuits
• Power Systems – Knowledge of power generation, transmission, and distribution
• Embedded systems – working with microcontrollers, PLCs, pump control, and embedded programming
• Signal Processing – Analyzing and manipulating electrical signals
• Control Systems – Understanding automation, robotics, and feedback control
• Electronics and Semiconductors – Working with transistors, diodes, and ICs
• Electrical Safety and Standards: Compliance with required electrical regulations
• Familiarity with standards, BS, and local regulations
• Tracking shop drawing versions and schematics, reading and interpreting shop drawings, riser diagrams, and As-Built drawings
• IP Networking Basics – Knowledge of LAN, IP addressing, switches, and routers
• System integration – linking ELV systems to work together through software or hardware
• Fiber Optics: Termination, splicing, and testing
• CCTV systems – installation, configuration, and networking of surveillance cameras
• Access Control Systems – Working with biometric readers, card access systems, and door controllers
• Fire Alarm Systems: Understanding of standards and design principles
• Public Address (PA) and Voice Evacuation Systems
• Structured Cabling Systems (SCS): data and voice cabling design and termination
• Building Management Systems (BMS) – integration and communication with HVAC, lighting, etc.
• Intercom and audio-visual (AV) systems
• SMATV/IPTV Systems – Satellite master antenna, and video distribution networks
• GSM Systems
• ELS Systems – emergency light system
• HAS Systems – home automation system
• Aircraft Warning Light System
• Specification writing – preparing detailed technical specifications for procurement and tendering
• Preparing single line diagrams, riser diagrams, and load schedules – accurate and clear representation of system architecture
• Reviewing shop drawings and submittals – ensuring alignment with design intent and standards
• Power Systems Design – Proficiency in MV/LV systems, load calculations, protection schemes, and grounding
• Proficiency in electrical testing (continuity, insulation resistance, earth fault loop, RCD, etc.) By using the correct testing devices
• Power distribution – designing and reviewing substations, grid systems, transformers, panel boards, switchgear, and busbars
• Lighting Systems – Interior/exterior lighting design, control systems, and lux level calculations
• HVAC power requirements: understanding coordination with MEP services
• Identifying material requirements, preparing technical submittals, and following up with suppliers and vendors
• Identifying and quantifying required materials and labor from drawings through Quantity Take-off (QTO) techniques
• Preparing BOQs (Bill of Quantities) – estimating materials and equipment accurately, and meeting bid submission deadlines
• Getting accurate pricing and product availability from vendors through RFQs (Requests for Quotes)
• Lighting design – indoor/outdoor lighting layout, lux level calculations using Dialux
• Circuit design – schematic diagrams, control wiring, and single-line diagrams (SLDs)
• Panel board design – circuit breakers, feeders, and distribution arrangements
• Earthing and Lightning Protection – Design according to safety standards
• Cable sizing and routing – based on current rating, voltage drop, and environmental conditions
• Perform testing, commissioning, snagging, and de-snagging activities

• Troubleshooting: diagnosing and fixing electrical faults, clashes in design, or site implementation
• Critical thinking – evaluating different solutions for efficiency and cost-effectiveness
• Mathematical proficiency – applying calculus, algebra, and differential equations
• Root Cause Analysis – Identifying and Solving Complex Electrical Issues
• Monitoring test results and meeting quality KPIs
• Conducting quality audits according to project-specific standards, and ensuring corrective and preventive actions

• Analyze and seek continuous improvements in the field
• Strictly follow the SOP
• Adhere to all safety rules, regulations, and always take appropriate precautions during working hours, and point out all unsafe issues to the HSEQ team to ensure a safe workplace
• Supporting (testing & commissioning) for EDtS machines, Workstations, and Matrix Server in MTB Project (Zayed Int. Airport).
• Installation, testing, commissioning, and servicing for HS 7555 aTiX and recheck Station.
• BLS, ION SCAN (600 & 500DT) and WTMD machines installation, testing, commissioning and servicing.
• Working on the MTB project and performing the installation and commissioning of X-ray machines as per site drawings
• Coordinating with the ORAT team and supporting the inspection and testing of HBSS and PBSS
• Follow up and accomplish pending work related to the customer or site subcontractor
• Maintain clear and concise business communication proficiency, both oral and written
• Establish and maintain a close relationship with product specialists in order to support the needs of the customer, and remain aware of current technical trends
• Document all inspection, maintenance, and repair works, and submit the data in ServiceMax on a timely basis, order parts, install them, return defective parts, manage the repair parts cycle, and ensure that the tools and test equipment are properly calibrated and maintained
• Monitor and evaluate the effectiveness of the company's products closely
• Offering customer training, providing customers with regular reports, and feedback on their service requests
• Maintain and submit an accurate, timely report to facilitate issue resolution
• Responding to customer callouts, evaluating, and resolving problems
• Installation and SAT were performed for all PBSS equipment, like HS7555 aTiX, HS100100T-2is, Ionscan600, 500DT, WTMD, and BLS at the MTB Airport Project in Abu Dhabi
• Installation and SAT were performed for the AD Customs project for HS100100T-2is and HS180145 2is pro units at the Ghwaifat border
• Perform testing using a multimeter, signal testers, and calibration tools
• Perform commissioning procedures: system verification, software installation, and handover-required documentation
• Perform preventive maintenance – scheduled inspections and repairs.

• Analyze and seek continuous improvements in the field
• Strictly follow the SOP
• Adhere to all safety rules, regulations, and always take appropriate precautions during working hours, and point out all unsafe issues to the HSEQ team to ensure a safe workplace
• Supporting (testing & commissioning) for EDtS machines, Workstations, and Matrix Server in MTB Project (Zayed Int. Airport).
• Installation, testing, commissioning, and servicing for HS 7555 aTiX and recheck Station.
• BLS, ION SCAN (600 & 500DT) and WTMD machines installation, testing, commissioning and servicing.
• Working on the MTB project and performing the installation and commissioning of X-ray machines as per site drawings
• Coordinating with the ORAT team and supporting the inspection and testing of HBSS and PBSS
• Follow up and accomplish pending work related to the customer or site subcontractor
• Maintain clear and concise business communication proficiency, both oral and written
• Establish and maintain a close relationship with product specialists in order to support the needs of the customer, and remain aware of current technical trends
• Document all inspection, maintenance, and repair works, and submit the data in ServiceMax on a timely basis, order parts, install them, return defective parts, manage the repair parts cycle, and ensure that the tools and test equipment are properly calibrated and maintained
• Monitor and evaluate the effectiveness of the company's products closely
• Offering customer training, providing customers with regular reports, and feedback on their service requests
• Maintain and submit an accurate, timely report to facilitate issue resolution
• Responding to customer callouts, evaluating, and resolving problems
• Installation and SAT were performed for all PBSS equipment, like HS7555 aTiX, HS100100T-2is, Ionscan600, 500DT, WTMD, and BLS at the MTB Airport Project in Abu Dhabi
• Installation and SAT were performed for the AD Customs project for HS100100T-2is and HS180145 2is pro units at the Ghwaifat border
• Perform testing using a multimeter, signal testers, and calibration tools