With over 24 years of dedicated experience in Architectural and Airport engineering drafting, predominantly in the Middle East for over 21 years, I bring a wealth of expertise to the table. My background includes 13 years of Architectural drafting for both tall towers and shorter buildings, as well as 11 years focusing on Airport Engineering Drawings, specifically in ELV systems, ICT, ATM, and AGL systems. Throughout my career, I have successfully completed projects across diverse sectors, including airport technologies, tall towers, industries, hotels, and resorts, consistently delivering high-quality results.
Airport Engineering-Air Traffic Management Systems, Airside and Terminal Systems (ICT, ATM & AGL) . Drawings such as design drawings, shop drawings, and as-built drawings in accordance with the submittal schedule as directed by Designer/Engineer (including floor plans, elevations, sections, 3D modeling, and isometric details). Developing schematic diagrams and connectivity diagrams by referring to design documents or following instructions from the Design Engineer. ·Creating electrical single line diagrams based on the load schedule. Creating detailed sketches as requested. · Developing mounting details for manufacturing purposes.
Architectural Draughtsman - · Studying project original contract drawings in coordination with PM, PCM, Coordinators. Checking of all types of drawings received from subcontractors and suppliers for coordination purposes. Prepare shop- drawings in accordance with the schedule of submittals as directed by the Project Coordinator · Establishing drawings for temporary works to allow proper execution of site works as and when requested. Establishes detailed sketches as requested. Incorporating Consultant/PM/PCM
requirements in a drawing for Onward submission, etc. Set the plot limits on AutoCAD according to the points handed over by Municipality and approved by the client/consultant including all grid Lines in coordination.
with surveyors. This setting shall be used to establish all subsequent drawings/sketches/details up to the end of the project, Including the as built drawings. Follows up the program of as built drawings issues as per the submission schedule · Establishing an agreed system for recording the status of all drawings with Project · Updating drawings as per client’s/consultant’s issued and agreed change notices/Variation Orders as instructed by the Project Coordinator · Visiting the site and coordinating with PCM/PE/SE and surveyors to Take notes of site.
I was responsible for creating detailed plans and drawings in accordance with the architect's instructions, ensuring their compatibility with the site plan (KROKI). I also generated comprehensive drawings for submission to the municipality and for tender purposes. These drawings had to meet the client's requirements while adhering to both client specifications and municipal regulations. I diligently coordinated these plans with the MEP drawings received from the MEP sections. Additionally, I produced general and detailed drawings, such as blowup details, sections, and site plans. When necessary, I also created structural drawings based on the schedule provided by the structural engineer and prepared documents required by the Housing Bank.
In Both Companies, Straight Gate and Union, I performed almost identical tasks
I used to create plans and drawings in accordance with client requirements, following the architect's instructions, to ensure their alignment with the plot and compliance with building regulations. This included the creation of elevations, 3D drawings, and details. Additionally, I prepared drawings for submission to the municipality or panchayath, encompassing all necessary drawings for tender purposes. I also ensured the coordination of these drawings with the MEP (Mechanical, Electrical, and Plumbing) drawings received from the MEP sections. Furthermore, I used to create structural drawings based on the schedule provided by the structural engineer.
Auto CAD 2D/3D,
Revit,
Sketch-up,
3DS Max,
Adobe Photoshop,
MS-Office
Bayanat Airport Engineering
Abu Dhabi (UAE)
As an Engineering Draughtsman, I am responsible for creating detailed technical drawings and schematics for a variety of airport systems and infrastructure projects, including:
· Airfield Ground Lighting System, Navaids & AWOS for Military Airbase ,
· Special Airport and Security Systems for T1/T3 Arrival Hall Abu Dhabi International Airport
· Instrument Landing System Al Ain International Airport
· ELV Systems for Retail Corridor Expansion Abu Dhabi International Airport
· ELV Systems for Terminal 3 Expansion Abu Dhabi International Airport
· Baggage Reclaim Expansion in Terminal 1 Abu Dhabi International Airport
· Runway Debris Monitoring System (RDMS) Dubai International Airport
· Information Communication Technology & Security Systems for T1 Segregation Abu Dhabi International Airport
· ATC Tower Consoles Sharjah International Airport
· ICT Systems for Terminal 1 In-Line Screening Abu Dhabi International Airport
· Monopulse Secondary Surveillance RADAR (MSSR) Al Ain International Airport
· Radio and Voice Communication Control Systems Al Bateen Executive Airport & Delma Airport
· Staff Access Control Management Systems Abu Dhabi International Airport
· Air to Ground Radio System Dubai & Al Maktoum International Airports (DXB & DWC)
· Airfield Ground Lighting System Al Ain International Airport
· Outer Automatic Weather Observation System Dubai and Al Maktoum International Airport
· Wide Area Multilateration (WAM) Surveillance System Dubai International Airport, Al Maktoum International Airport and Remote Sites in UAE (AUH, AAN, DXB, UAQ)
· In addition to these significant projects, I have also worked on several smaller projects, .
Details and locations of the listed projects can be found on the Bayanat Engineering website. Please refer to the link 6405e4_7bf09faf27c24cbab300ed0f01dd9aeb.pdf (bayanatengineering.com).
Arabian Construction Company
Abu Dhabi (UAE)
Project : Masdar Institute of Science and Technology (M.I.S.T)
Clint : Masdar (A MUBADALA COMPANY)
Employer : Aldar Properties PJSC
Project Manager : Turner Construction-International LLC
Consultant : R, W, Armstrong & Foster + Partners
Doha (Qatar)
Projects : The Pearl Qatar Viva Bahriya Parcel-29. (Tower, Town
Home & low- rise)
The Pearl Qatar Porto Arabia Parcel-4&5.
(Two Tower & Town Home)
Client : The United Development Corporation
Consultant : Dar Al Handash Shares and Partners
Union Engineering Consultancy in Ras Al Khaimah U.A.E.
· G+10 office building in RAK, for CUSTOM Port Department
· Shams Tower in RAK, for Moh’d Ali Shams (G+7)
· Al Barak Complex in RAK, for Shaikh Sultan
· Al kaet Complex + Villas in Kuzam RAK, for Mr. Moh’d Ahmad Salem Alkaet
· Hassanein Ware House & Offices in RAK, Free Zone, for Hassanein Co. Trading
· Stallion Lubricants FZC Manufacturing in RAK Free Zone for Stallion Lubricants
· more than 25 villas, & multi-storey residential & commercial building
Straight Gate Engineering Consultancy Oman
· Khasab Tower , in Khasab for Sh. Yousuf_
· Khasab Hotel in Khasab for Maidal Trading LLC.
· Heavy Equipment Workshop at Aisha Island for Musandam Rock LLC
· Chemical Analytical Laboratory at Aisha Island for Musandam Rock LLC
· Khumzar Primary School at Khumzar for Ministry Of Education
· more than 200 villas & more than 5 multi store , residential & commercial building
Design Tech. Engineering Cont. (Calicut, India)
· K.K tower in Edavannappara (Calicut, Kerala)
· Thettath Tower Edavannappara (Calicut, Kerala)
· Kannam Purath Apartment in Edavannappara (Calicut, Kerala)
· Mavoor Co-operative Bank Building in Mavvor (Calicut, Kerala)