AutoCAD
Reynan Noble
Technical Manager/ Professional Electrical Engineer
Abu Dhabi,UAE
Summary
Dynamic Technical Project Manager with eighteen(18) years of experience leading all phases of Tendering and Project Management of Electrical Systems for Construction. Leverages strong business, financial and technical acumen to drive continuous process improvements, increase competitive advantage and bolster bottom-line revenue growth. Detailed and organized with proven strength in aligning business goals with technology solutions.
Overview
18
18
years of professional experience
7
7
years of post-secondary education
3
3
Certifications
2
2
Languages
Work History
Technical Manager
Power Tech for Power Transmission and Control LLC
Abu Dhabi
03.2021 - Current
- Study and initiate tendering and negotiation process for Utilities/Infrastructure works to win new construction projects.
- Evaluated project scope to estimate costs and set timelines for project delivery.
- Prepared budgets by estimating materials, labor, and construction costs.
- Guided and directed consultant and authority having jurisdiction inspectors through project construction, commissioning, and closeout.
- Determined project schedule, including sequencing all construction activities for optimal efficiency.
- Contributed to construction planning process, including ongoing and maintenance period projects.
- Implemented systems to improve process efficiency and reduce project duration and reduced process downtime by restructuring ongoing projects, ensuring quality and compliance.
- Improved process efficiency and workflow by implementing productivity initiatives and proactively identifying and resolving problems.
- Make sure projects are safe from risk by identifying risk, eliminate the risk or mitigate the risk if cannot be avoided to achieve timely and cost-effective project deliverables.
- Acts as Project Manager for awarded Utilities/Infrastructure Projects.
- Conducted critical pre-installation conferences with Project subcontractors, consultants, and manufacturer's representatives.
- Monitored, coached, and supervised Technical Department staff's to maximize productivity.
- Monitored subcontractor operations and applied effective time, resource, and money management strategies to deliver under-budget project completion.
- Monitored supply levels and identified cost-effective materials to reduce project expenses.
- Conducted routine quality audits to verify progression against specifications and initiated corrective actions to remedy concerns.
- Collaborated with construction administration consultants to schedule regular field observations.
- Attend weekly Utility/Infrastructure project meetings, facilitating stronger communication, and helping to resolve critical issues.
- Coordinated with site personnel, clients, and authorities having jurisdiction to achieve on-time project delivery.
- Obtained Infrastructure NOC/NOI in Abu Dhabi Municipality Portal. Apply Infrastructure Permit System(IPS) in ADM Portal.
- Scheduled utility service providers according to project timelines.
- Oversaw entire Utility/Infrastructure turnover process, enhanced communications between all construction management to facilitate smooth completion.
MEP Head
Fourth Dimension General Contracting LLC
Abu Dhabi
04.2019 - 04.2020
- In charge for overall Management of MEP Department.
- Manage Tendering for MEP Work.
- Analyze and study received tender documents and addendums. Requests for information if required.
- Coordinate with Mechanical Engineer and Civil Engineer in calculations, value engineering, quantity take-off, manpower and equipment allocation, request for quotation and price MEP BOQ based on company standard and procedure and uplift values for Tender Submission.
- Project Management of MEP Systems implementation at site which includes mobilization planning and execution, construction planning and execution, control of work activities, manpower, equipment mobilization and utilization to meet project deadline and completion. Testing and commissioning coordination with suppliers, subcontractors and third parties involved in execution and completion of testing and commissioning works.
- Serves as MEP coordinator in maintenance phase of project contract requirement.
- Design and Analysis of Electrical System for Construction.
- Works with Different Government agencies/Utility companies for Project Constructability, Permits and Inspection approvals.
- Oversee Procurement, Materials and Labor as per Project Specifications and Contract Requirements.
- Coordinate with Client, Consultant, Subcontractor, and other Engineering Discipline through weekly construction project meetings and MEP coordination meetings.
Senior Electrical Engineer
Fourth Dimension General Contracting LLC
Abu Dhabi
05.2012 - 03.2019
- Saved $350,000 by implementing cost-saving initiatives that addressed construction implementation problems.
- Initiated project management knowledge study and subsequently standardized project management practices.
- Drove construction operational improvements which resulted in savings and improved profit margins.
- Oversee tendering and negotiation process for all electrical discipline required to win new construction projects.
- Perform calculations, value engineering, quantity take-off, manpower and equipment allocation, request for quotation and price electrical bill of quantities based on company standard, procedure, and uplift values for tender submission.
- Determined most effective approaches to new projects by reading and analyzing project drawings, specifications, and standards.
- Defined engineering problems, collected data, established facts, and drew conclusions to solve various engineering issues.
- Assessed scope and requirements to make accurate electrical design determinations for ongoing projects.
- Prepare electrical design calculations for construction projects including short circuit calculation for switchgear selection and sizing, voltage drop and cable sizing, cable management system sizing and selection and lighting illumination.
- Created project prototypes and models, electrical schematics, shop drawings and other three- dimensional drawing details using AutoCAD and Revit software.
- Oversaw draftsmen produced shop drawings within scheduled time frame. Monitors and controls shop drawings log and store hardcopy and electronic copy of revisions, approved drawings, and as-built drawings properly.
- Designed and approved power distribution requirements for residential and commercial building construction.
- Designed and select light fittings as per client briefs and project specification using Dialux software.
- Design and coordinate with vendor to produce Earthing and Lightning Protection shop drawings and procure materials.
- Evaluated project scope to estimate costs and set schedule milestones
- milestones for project delivery.
- Prepared budgets by estimating equipment, materials, labor, and construction costs.
- Review awarded tender documents and create specific project scope of works and technical documents.
- Attend project kick-off meetings and mobilize team to install utility services to site office and temporary utilities for project site requirements.
- Attended critical pre-installation conferences with Mechanical, Electrical and Plumbing (MEP) subcontractors, consultants, and manufacturer's representatives.
- Monitored, coached, and supervised various electrical discipline teams of three (3) engineers thirty (30) staffs in seven (7) years.
- Coordinate with vendors and procure materials and equipment as per project requirement.
- Performed constructability reviews consisting of independent, structured assessment of construction bid documents to promote coordination, eliminate ambiguity and minimize project issues.
- Prepared, checked, and approved submittals and transmittals for consultant and subcontractors. It includes generating Site Clarification Request (SCR), Site Inspection Report (SIR), Materials Inspection Report (MIR), Tests Reports, Approved Materials Submittals, Alternative Material Submittals, Subcontractor Approval Request and Material Approval Requests.
- Managed quality assurance program and performed quality control assessment.
- Monitored installation of materials and equipment for compliance with drawings and specifications.
- Reviewed progress controls for quality assurance, health, and safety and implement necessary actions and adjustments to control deviation and adapt approved project changes.
- Planned and managed engineering projects and continuous improvement programs to reduce labor and costs.
- Attend weekly MEP progress meetings with consultant and subcontractor, facilitating stronger communication, and helping to resolve critical issues.
- Resolved conflicts and negotiated mutually beneficial agreements between parties.
- Resolved subcontractor problems, improved operations, and provided exceptional client support.
- Evaluated change order requests in response to out-of-scope work activities and developing field conditions.
- Generated change orders for project using Microsoft Project.
- Supported MEP Head, Control Manager and Senior Construction Manager throughout decision-making and launch by providing weekly compliance reports to drive process improvement and corrective measures.
- Assisted with quality inspections and document editing.
- Assisted Senior Construction Manager in review, approval and archiving of all closeout documents.
- Mentored junior engineers and new hires to better improve competency and efficiency of all staff.
Senior Engineer/General Electrical Engineer
Kulak Contracting Const., Trading & Industrial
Abu Dhabi
03.2011 - 04.2012
- Determined most effective approaches to new projects by reading and analyzing project drawings, specifications, and standards.
- Defined engineering problems, collected data, established facts, and drew conclusions to solve electrical engineering issues.
- Assessed scope and requirements to make accurate electrical design determinations for ongoing projects.
- Prepare electrical design calculations for construction projects including short circuit calculation for switchgear selection and sizing, voltage drop and cable sizing, cable management system sizing and selection and lighting illumination.
- Created electrical schematics using AutoCAD.
- Rendered technical drawings and electrical systems specifications as per project requirement and Abu Dhabi Distribution Company standard.
- Designed and approved power distribution requirements for commercial building construction.
- Designed and select light fittings as per client briefs and project specification using Dialux software.
- Design and coordinate with vendor to produce Earthing and Lightning Protection shop drawings and procure materials.
- Prepared budgets by estimating materials, labor, and construction costs.
- Evaluated project scope to estimate costs and set timelines for project delivery.
- Coordinated project team of five (5) engineers, three (3) designers and one (1) surveyor for basement + ground floor + mezzanine and 7 typical floors commercial building.
- Prepare submittals and transmittals for consultant and subcontractors. It includes generating Site Clarification Request (SCR), Site Inspection Report (SIR), Materials Inspection Report (MIR), Tests Reports, Approved Materials Submittals, Alternative Material Submittals, Subcontractor Approval Request and Material Approval Requests.
- Coordinated with vendors to identify and procure appropriate equipment necessary for project completion
- Initiated project management knowledge study and subsequently standardized project management practices.
- Improved methods for measurement, documentation, and workflow management.
- Proposed electrical product and system modifications to improve quality and efficiency.
- Implement site project construction quality control requirements including inspection and testing of installations in timely manner.
- Monitored manufacturing operations of switchgears for compliance with safety protocols and material standards.
- Monitored site electrical installation and operations to consistently meet rigorous customer requirements.
- Prepare material summary reports, report installed quantities and perform receipt inspection and monitoring of incoming materials.
- Inspected completed installations to observe operations and verify conformance to design and equipment specifications.
- Implemented site project construction quality control requirements including inspection and testing of installations in timely manner.
- Performed in-depth electrical acceptance testing of completed hardware, including continuity and high-potential isolation testing.
- Performed maintenance procedures and repairs on existing electrical products and systems.
- Confirmed system and component capabilities by conducting testing methods.
- Performed maintenance procedures and repairs on electrical products and systems as per warranty and contract agreement.
- Implemented cutting-edge processes and safety practices to reduce electrical construction hazards.
- Communicated with engineers and customers to discuss potential and existing engineering projects.
- Prepared technical documentation for operation, troubleshooting and maintenance of industrial systems.
- Supported Project Manager for project close-out and handling over requirement.
General Electrical Engineer
Turner and Miller International LLC
Abu Dhabi
01.2010 - 02.2011
- Prepare Electrical Design Calculations for Construction Projects. It includes Short Circuit Calculation for Switchgear selection and Sizing, Voltage Drop and Cable Sizing, Lighting Illumination and Cable Management System Sizing and Selection.
- Prepare MV and LV Systems Design for District Cooling Plant Projects.
- Prepare Bill of Quantities for MV & LV Systems and HVAC Ducting and Equipment.
- Implement Site project construction quality control requirements including inspection and testing of installations. Prepare material summary reports and report installed quantities.
- Perform receipt inspection and monitoring of interim construction site storage areas for permanent plant materials.
Technical Instructor
Civil Aviation Training Center
Bangkok
06.2009 - 08.2009
- Performed instructional services for Civil Aviation students by teaching seven (7) subjects as follows: Instrumentation and Control, Pneumatics and Hydraulics (Basic and Electro), Mechanics, Thermodynamics, Electromagnetics, Lights and Electricity subjects.
- Provided instructional handouts, texts, audiovisual aids, and other materials to facilitate learning.
- Maintained documentation on educational services and tracked students' progress to gauge overall success of learning program.
- Provided detailed instruction and role modeling for acceptable social and work-related behaviors.
- Planned and documented programs of study meeting individual needs and abilities of students.
- Assisted program participants with achieving career and learning goals.
Technical Instructor
Semirara Mining Corporation/ STCI
Semirara
08.2006 - 07.2008
- Performed instructional services for trainees in ten(10) subjects namely: Technical Mathematics, Applied Physics, Electrical Circuit Analysis, Motor Control, Building Wiring installation, Basic and Electro-Pneumatics, Basic and Electro-Hydraulics, Programmable Logic Control, Basic Instrumentation and Control and Technical Drawing using AutoCAD.
- Provided instructional handouts, texts, audiovisual aids, and other materials to facilitate learning.
- Maintained documentation on educational services and tracked students' progress to gauge overall success of learning program.
- Provided detailed instruction and role modeling for acceptable social and work-related behaviors.
- Planned and documented programs of study meeting individual needs and abilities of students.
- Managed quality assurance program, including on-site evaluations, internal audits, and customer surveys.
Renewable Energy Engineer
Yamog Renewable Energy Development, Inc.
Davao
04.2004 - 06.2005
- Supervised installation of approximately five (5) solar photovoltaic projects used as Battery Charging Station and Stand-alone Solar Home Systems in off-grid communities.
- Conducted solar PV technician's training, system maintenance and energy consumption seminar for system sustainability.
- Analyzed and reported pre-installation and post-operation of solar photovoltaic and its components.
- Supervised installation of two (2) micro-hydro power projects. It includes power station installation, transmission and distribution, and residential electrical installation.
- Conducted orientation and maintenance seminar on micro-hydro projects.
Irrigation Supervisor
Lapanday Agricultural Development Corporation
Davao
12.2002 - 03.2004
- Analyzed survey reports, maps, blueprints, and other topographical and geologic data to effectively plan infrastructure and construction projects.
- Used AutoCAD to analyze topographical data and design solutions.
- Prepared and maintained accurate and complete work records and reports using Microsoft Excel and PowerPoint.
- Assessed scope and requirements to make accurate project design determinations for four (4) projects.
- Determined schedule and budget requirements for irrigation automation project to coordinate efficient work.
- Controlled engineering activities to maintain work standards, adhere to timelines and meet quality assurance targets.
- Determined availability, reliability, and viability of irrigation controller materials for under tree and drip irrigation projects.
- Produced precise technical specifications and data sheets.
- Supervised installation of Automated Irrigation System using Drip, Micro Sprinkler and Under tree Sprinkler system.
- Designed Automated Irrigation Controller using Zeleo-Logic smart relay and other micro-PLC
- Supervised Pump Station Crew and Line Tenders.
- Formulated work plan, cost of labor, operation, and maintenance expenses.
- Submitted reports to various activities in Irrigation Department.
Part-time College Instructor
Notre Dame of Kidapawan College
KIdapawan
03.2001 - 01.2003
- Taught Electrical Circuits 1, Advanced Engineering Mathematics, Differential Equations, Algebra and Physics.
- Probed, encouraged, and facilitated class discussions by building discussions into lessons, asking open-ended questions, and using techniques to track student participation and actively solicit input.
- Graded quizzes, tests, homework, and projects to provide students with timely academic progress information and feedback.
- Applied innovative teaching methods to encourage student learning objectives.
- Reviewed program materials and coordinated updates to keep department materials relevant and accurate.
- Evaluated and supervised student activities and performance levels to provide reports on academic progress.
- Created lesson plans for courses, modifying throughout year to meet time constraints and specific interests of class.
- Conducted engaging in-class discussions to facilitate learning and encourage participation.
Education
Master of Engineering - Electrical Engineering - Electrical Engineering
University Of Southeastern Philippines
Davao City, Philippines 06.2002 - 10.2002
Bachelor of Science - Electrical Engineering
University Of Southeastern Philippines
Davao City, Philippines 10.1996 - 03.1999
Bachelor of Science - Computer Science
Mindanao State University-Iligan Institute of Tech
Iligan City, Philippines 06.1992 - 10.1996
Skills
Project Management
undefinedAccomplishments
Accorded the Title of ASEAN Chartered Professional Engineer (ACPE) by the Association of Southeast Asian Nations (ASEAN) Chartered Professional Engineering Coordinating Council after satisfactorily meeting the requirement to be an ACPE.
Awarded the Professional Electrical Engineer (PEE) license after passing the Technical Evaluation for the Upgrading as PEE given by the Philippine Government Professional Regulation Commission (PRC).
Attended the Electricity Wiring Regulations Course E1 and passed the Examination given by the Regulation and Supervision Bureau of Abu Dhabi, UAE as a requirement to be a Registered Electrical Engineer in Abu Dhabi and Al Ain, UAE.
Managed and delivered two (2) important and challenging Command of Military Works (CMW) projects as approved Project Electrical Engineer for K-3 Military Facilities at Sweihan Airbase, Zayed Military City and Hangar Project for Fighter Aircrafts at Dhafra Airbase, Abu Dhabi.
Supervised construction projects of District Cooling Plant. Sized switchgears, transformers, ups, battery, power cables, cable management system, distribution boards and motor controllers.
Directed off-grid solar photovoltaic projects in armed conflict affected off-grid communities for home lighting and irrigation pumping. Implemented the project in schedule considering the terrain, weather condition and risks in the logistics and work execution.
Served as project lead for multiple irrigation rehabilitation projects with $300K budget entailing control systems automation at four sites; completed all projects with $200K spend.
Managed all irrigation automation projects three weeks ahead of schedule.
Affiliations
Integrated Institute of Electrical Engineers - Lifetime Member
ASEAN Chartered Professional Engineer Register - Member
Software
Revit
Dialux
ETAP
Microsoft Office & Project
Primavera
Certification
ASEAN Chartered Professional Engineer - Association of Southeast Asian Nation (ASEAN)
Trainings and Courses
Revit 2021: Essential Training for Architecture (Imperial and Metric), LinkedIn Learning – May 2020
Revit 2020: Essential Training for MEP (Metric), LinkedIn Learning – April 2020
Becoming a Project Manager Learning Path, LinkedIn Learning – April 2020
Cert Prep: Project Management Professional (PMP)®, LinkedIn Learning and PMI – April 2020
Microsoft Project 2019 and Project Online Desktop Essential Training, LinkedIn Learning – April 2020
Stay Ahead in Construction Management, LinkedIn Learning – February 2019
Stay Ahead in Sustainability and Green Building, LinkedIn Learning – February 2019
Advance Your Skills in Construction Estimating, LinkedIn Learning – February 2019
Safety in Utility Industry, University at Buffalo, March 2020
Electric Power System, University at Buffalo, February 2020
Natural Gas, University at Buffalo, February 2020
Timeline
Technical Manager
Power Tech for Power Transmission and Control LLC
03.2021 - Current
ASEAN Chartered Professional Engineer - Association of Southeast Asian Nation (ASEAN)
03-2020
MEP Head
Fourth Dimension General Contracting LLC
04.2019 - 04.2020
Professional Electrical Engineer - Professional Regulation Commission, Manila, Philippines
05-2018
Registered Electrical Engineer - Regulation and Supervision Bureau, Abu Dhabi, UAE
09-2013
Senior Electrical Engineer
Fourth Dimension General Contracting LLC
05.2012 - 03.2019
Senior Engineer/General Electrical Engineer
Kulak Contracting Const., Trading & Industrial
03.2011 - 04.2012
General Electrical Engineer
Turner and Miller International LLC
01.2010 - 02.2011
Technical Instructor
Civil Aviation Training Center
06.2009 - 08.2009
Technical Instructor
Semirara Mining Corporation/ STCI
08.2006 - 07.2008
Renewable Energy Engineer
Yamog Renewable Energy Development, Inc.
04.2004 - 06.2005
Irrigation Supervisor
Lapanday Agricultural Development Corporation
12.2002 - 03.2004
Master of Engineering - Electrical Engineering - Electrical Engineering
University Of Southeastern Philippines
06.2002 - 10.2002
Part-time College Instructor
Notre Dame of Kidapawan College
03.2001 - 01.2003
Bachelor of Science - Electrical Engineering
University Of Southeastern Philippines
10.1996 - 03.1999
Bachelor of Science - Computer Science
Mindanao State University-Iligan Institute of Tech
06.1992 - 10.1996
Similar Profiles
CLAYTON MORIASICLAYTON MORIASI
Site Engineer at Kenya Breweries LTD at Power Transmission and Control Services (PTC).Site Engineer at Kenya Breweries LTD at Power Transmission and Control Services (PTC).
null null
QC Engineer at GROW CONTROL POWER TECHQC Engineer at GROW CONTROL POWER TECH
Jigar ChauhanJigar Chauhan
Associate Manager -Transmission (O&M) at Maharashtra Eastern Grid Power Transmission Company Ltd (Group Company of Adani Transmission Ltd)Associate Manager -Transmission (O&M) at Maharashtra Eastern Grid Power Transmission Company Ltd (Group Company of Adani Transmission Ltd)