Vishnu TRK
Mechanical Piping Designer and Piping Checker with over 3 years of experience in EPC and Oil & Gas piping fabrication projects. Experienced in piping spool checking, fabrication drawing review, piping isometric verification, and 3D piping modeling using SP3D, AVEVA E3D, and PDMS. Skilled in ensuring fabrication readiness, reviewing engineering drawings, coordinating with engineering and fabrication teams, and maintaining compliance with ASME codes, client specifications, and QA/QC standards. A detail-oriented professional committed to delivering high-quality engineering documentation and supporting efficient project execution.
Work History
Mechanical Piping Checker
7 Months- Review and check piping spool drawings, fabrication drawings, and isometric drawings to ensure accuracy and compliance with project requirements.
- Perform detailed spool checking for fabrication readiness including dimensions, pipe routing, material specifications, and component verification.
- Verify piping components such as pipes, fittings, flanges, valves, reducers, supports, and specialty items as per drawings and specifications.
- Check weld locations, weld proximity, NDE requirements, and fabrication constraints before spool release.
- Ensure spool drawings comply with client specifications, project standards, and fabrication procedures.
- Review piping drawings for constructability and fabrication feasibility.
- Verify shipping limits and spool breakup requirements to optimize transportation and site installation.
- Check material correlation between piping drawings, MTOs, and fabrication documents.
- Identify drawing discrepancies, clashes, missing information, and coordinate with engineering teams for resolution.
- Coordinate with fabrication teams to clarify technical queries and support smooth manufacturing activities.
- Review design changes, redline markups, and incorporate approved modifications into drawings.
- Maintain quality standards by performing detailed drawing checks before fabrication approval.
- Support preparation and updating of engineering documents, drawing registers, and project deliverables.
- Follow company QA/QC procedures and ensure deliverables meet client expectations.
- Project Type: Oil & Gas / EPC Piping Fabrication Projects.
- Roll: Piping Spool Checker.
- Project Experience: Involved in multiple oil & gas piping fabrication projects focused on spool drawing preparation and fabrication detailing.
- Worked on piping spool breakdown for shop fabrication and site installation requirements.
- Handled piping isometric-based spool checking for carbon steel and alloy piping systems.
- Participated in fabrication-ready spool preparation including weld mapping, NDE marking, and field weld identification.
- Worked on projects involving piping systems such as process lines, utility lines, and equipment interconnections.
- Supported fabrication workflow by ensuring spool drawings are aligned with shop manufacturing limitations and transportation constraints.
- Reviewed engineering deliverables from EPC packages and converted them into fabrication-ready outputs.
- Coordinated on project revisions and design changes during ongoing fabrication stages.
- Ensured project compliance with client specifications, ASME codes, and internal fabrication standards.
Mechanical Piping Designer
8 MonthsNippon Steel Wakayama A116 (Skid) – Client: Jord Energy
* Designed Syngas, Purge Air, Natural Gas, and Nitrogen piping systems
* Intelligent modelling of shoe supports and skid-mounted piping
* Produced system and spool isometrics for fabrication
* Generated GA and isometric drawings for construction
* Coordinated with multi-discipline teams for design finalization
PRU, CDU-II, FCCU Units – Client: HPCL, Vizag
* Executed piping modelling for process units including exchangers and pumps
* Non-critical pipe support modelling and GA extraction
* Assisted in resolving site-related piping issues
CDU-II Unit – Vadinar Refinery – Client: Nayara Energy Ltd., Gujarat
* Modelled refinery piping systems for major process equipment
* Extracted GA and isometric drawings
* Modified drawings based on design changes and reviews
* Coordinated with multi-disciplined teams for design finalization
G010 PSINTAO (Skid) – Client: Jord Energy
* Designed Fuel gas, Hp water, Ip water piping systems
* Intelligent modelling of shoe supports and skid-mounted piping
* Produced system and spool isometrics for fabrication
* Generated GA and isometric drawings for construction
* Coordinated with multi-discipline teams for design finalization
Education
Piping Design Engineering Theory Course
Diploma in Mechanical Engineering
Bachelor of Commerce (B.Com.)
Skills
PERSONAL PROFILE
- Name: Vishnu TRK
- Location: Abu Dhabi (UAE)
- Visa Status: UAE Employment Visa (Transferable)
- Passport Number: C6674880
Software Expertise
- Equipment modelling and pump modelling using SP3D, E3D&PDMS
- 3D Pipe Modelling and Pipe isometric extraction using SP3D, E3D&PDMS
- Pipe Support placing and modelling in SP3D as per support standard
- Detail Engineering of piping isometric supports & BOM using SP3D, E3D&PDMS
- Piping layout checking and update in SP3D, E3D&PDMS software as per P&ID
Reports Generation (MTO)
- Reports generation (MTO) using templates.
- Modification of reports.
Experience in Spool Fabrication
Project Type: Oil & Gas / EPC Piping Fabrication Projects.
Roll: Piping Spool Checker.
- Project Experience: Involved in multiple oil & gas piping fabrication projects focused on spool drawing preparation and fabrication detailing.
- Worked on piping spool breakdown for shop fabrication and site installation requirements.
- Handled piping isometric-based spool checking for carbon steel and alloy piping systems.
- Participated in fabrication-ready spool preparation including weld mapping, NDE marking, and field weld identification.
- Worked on projects involving piping systems such as process lines, utility lines, and equipment interconnections.
- Supported fabrication workflow by ensuring spool drawings are aligned with shop manufacturing limitations and transportation constraints.
- Reviewed engineering deliverables from EPC packages and converted them into fabrication-ready outputs.
- Coordinated on project revisions and design changes during ongoing fabrication stages.
- Ensured project compliance with client specifications, ASME codes, and internal fabrication standards.
Experience in Piping Designing
- Performed equipment modeling using vendor data for pumps, heat exchangers, tanks, and pressure vessels.
- Updated equipment properties, attributes, and specifications in accordance with project requirements.
- Created and modified standard equipment models.
- Created, positioned, and modified nozzles, including orientation, dimensions, and specifications.
- Utilized model editor tools and primitive modeling techniques for equipment development.
- Performed 3D pipe routing based on P&IDs and equipment layouts.
- Created straight and sloped pipe runs using equipment references.
- Applied piping specifications, component bore specifications, and routing standards.
- Configured pipe routing based on process flow and generated piping isometrics.
- Split and merged pipe runs as required for design and fabrication.
- Modeled vents, drains, valves, flanges, supports, pumps, and equipment in accordance with P&IDs.
- Applied pipe insulation, tracing, material specifications, and piping layout requirements.
- Created and modified pipe slopes to meet project specifications.
- Modeled and positioned pipe hangers and supports in accordance with project standards.
- Modified support structures and supporting frameworks as required.
- Positioned and adjusted supports to suit piping layouts and fabrication requirements.
- Created logical and physical pipe supports using SP3D, AVEVA E3D, and AVEVA PDMS.
ISO Draft
- Creations Fabrication drawing, isometric drawing.
- Preparing Isometric Drawing in SP3D, E3D, PDMS.
- Ability to design & develop equipment-based GA drawing plot plan
- Equipment Arrangement Drawing
Drafting - GA
- Excellent interpreting and drawing skills
- Ability to design and develop equipment layouts-based GA drawing plots plants
- Equipment arrangement drawing
- Creation of unit & overall plot plan
- Prepared for isometric extraction in SP3D, E3D, PDMS.
- To prepare detail engineering extracting of bill of materials piping estimating for project knowledge.