Yuvaraj K
Alwathba
Summary
Systems professional with a proven track record in delivering high standards and impactful results. Expertise in system design and integration, driving operational efficiency improvements. Recognized for strong teamwork and adaptability, emphasizing innovation and reliability. Proficient in systems analysis and project management, known for meticulous attention to detail and a proactive approach.
Overview
10
10
years of professional experience
Work History
System Engineer - R&D
Resource Indiustries
10.2024 - Current
- Integration of avionics, propulsion, communication, navigation, payload, and power systems in Multirotor, Fixed-wing & Hybrid/VTOL UAV platforms
- Collaborate with the Product Development team to refine UAV platforms through rigorous design validation, performance tuning, and iterative optimization cycles based on real-world feedback
- Co-ordinate, and conduct structured flight tests in alignment with engineering objectives using detailed Flight Test Plans (FTP) and Test Cards
- Identify, isolate, and resolve hardware/software issues. Employ systematic debugging approaches to pinpoint critical failures and propose permanent corrective actions
- Use structured RCA methods (e.g., 5 Whys, Fishbone diagrams) to trace issues back to source failures across mechanical, electrical, and software domains
- Collect and analyze logs and telemetry to extract key metrics. Create concise yet insightful reports that summarize test results, system behavior, and anomalies
- Resolved complex technical issues through effective problem-solving techniques and root cause analysis
- Comprehensive user documentation to guide pilots and operators on UAV startup, operation, mission planning, and safety procedure
- Develop Preventive and Corrective Maintenance Manuals covering inspection schedules, troubleshooting charts, parts replacement procedures, and health monitoring techniques
- Create detailed documentation outlining the entire lifecycle of the UAV, including development history, test milestones, version control, performance records, service life tracking, and EOL (End of Life) conditions
- Establish and maintain SOPs for integration, testing, calibration, mission preparation, and emergency procedures
- Prepare Pre-Flight, Post-Flight, Maintenance, and Safety Checklists for systematic execution of UAV operations, ensuring repeatability and compliance with aviation standards
- Experienced with ArduPilot, PX4, and other flight controller ecosystems, including firmware tuning, log analysis, parameter optimization, and custom configuration
- Hands-on expertise with FPV systems, specializing in Betaflight and INAV platforms for both multirotor and fixed-wing UAVs. Skilled in PID tuning, manual/acro flight, autonomous GPS missions, video transmission optimization (analog and digital), and custom drone builds tailored for high-performance and long-range applications
- Well-versed in modern FPV drone warfare trends, including the tactical use of COTS FPV drones for kamikaze missions, precision payload drops, and real-time surveillance. Experienced in configuring low-latency video systems, mission-specific adaptations, and implementing safety, fail-safe, and redundancy measures critical for combat or high-risk environments
- Able to liaise across multidisciplinary teams, present findings to stakeholders, and train technical/non-technical users effectively
Manager-System engineering
Flyingwedge Defence & Aerospace PVT LTD
02.2024 - 09.2024
- Spearheaded end-to-end integration of avionics, propulsion, navigation, communication, and payload subsystems for UAVs across multirotor, fixed-wing, and hybrid/VTOL platforms
- Led cross-functional teams in integrating flight control systems (Pixhawk Cube series, ArduPilot,QGCS & OEM Applications)
- Tuned and validated control parameters (PIDs) across diverse airframes for stable flight, precision navigation, and smooth VTOL transitions
- Led R&D efforts in propulsion optimization (motor–ESC–propeller–battery combinations)(Curve fitting)
- Drove continuous improvement via detailed log analysis, parameter tuning, and flight test feedback, reducing integration cycle time
- Collaborated with firmware and software teams to develop custom MAVLink interfaces, onboard scripts, and mission-specific payload control systems
- Designed comprehensive test plans, pre-flight checklists, and test case matrices to validate avionics, control logic, sensor performance, and flight envelope limits
- Contributed to root cause analysis and corrective actions post-flight, improving reliability and reducing test cycle time in successive builds
- Managed and motivated employees to be productive and engaged in work
- Proven ability to learn quickly and adapt to new situations.
- Accomplished multiple tasks within established timeframes.
Zonal Manager-Operations
General Aeronautics Private Limited
03.2023 - 01.2024
- Deploying the drones to B2B partner in the given location at north region
- I have been working with the organization and I get to learn lot of things at General Aeronautics such as CA02, GA3 & CA04 Systems – 33 kgs, 10 kgs & 45 kgs respectively.
- Mostly I have spent my time in Operations – Agriculture Spray Activities at different locations in the country.
- Creating the SOP's for operations and providing training to the fresh pilots
- Conducted comprehensive performance evaluations of staff members annually; provided constructive feedback for improvement purposes
- Established a customer-centric culture within the zone, leading to improved customer satisfaction ratings and repeat business
- Working daily from each stakeholder to reach to conclusions on committed date and time to conduct smooth operations
- Remote pilot license generated for small category & Medium category
- Generating a report to improve the team efficiency and reviewing every week
- Providing a Refresher training to the on-ground pilot and improvising the skills of the pilots on monthly basis
- I am part of R&D as well at the GA organization and learned & worked in different systems
Sr. Flight Test Engineer / Sr. Engineer
General Aeronautics Private Limited
11.2020 - 03.2023
- Conducted system tests for demos and trials, diagnosing and rectifying faults promptly
- Acquired knowledge of CA02, GA3, and CA04 systems, weighing 33 kg, 10 kg, and 45 kg respectively
- Focused on operations for agricultural spray activities across various locations nationwide
- Transitioned to project engineer role based on customer satisfaction initiatives, enhancing service quality
- Strengthened fundamentals, resulting in positive feedback from customers following project completion
- Participated in R&D at General Aeronautics, gaining hands-on experience with diverse systems
- Completed DGCA flying course training at FAA – Flytech Aviation Academy in Hyderabad
- Engaged in prototype testing for RC flying and R&D products to optimize system performance
- Maintained up-to-date documentation of all test plans, procedures, results, and defect tracking databases for future reference or audits
- Tracked test reports and failures determined by root cause data trends
Sr. Engineer
Asteria Aerospace Private Limited
04.2017 - 10.2020
- Tested systems for demonstrations and trials, diagnosing and rectifying faults as needed
- Acquired extensive knowledge of A400, A200, A410, A400-Max, AT-05, AT-15, A410-XT, and A200 (2kg) at Asteria Aerospace
- Integrated hardware and software components, including GPS modules, LIDAR, ESCs, Wi-Fi modules, and object detection sensors
- Diagnosed and debugged component efficiency to optimize assembly and performance
- Contributed significantly to development of AT-15 Hybrid UAV (VTOL-Fixed Wing Aircraft)
- Gained experience working on smaller AT-05 Hybrid UAV system to enhance skill set
- Served as UAV instructor for A400 operators across various sectors including government and private domains
- Progressed from UAV Test Pilot to Senior Engineer in Flight Operations and Business Development
- Improved project efficiency by streamlining engineering processes and implementing innovative solutions
- Monitored employee performance to keep projects on task
- Mentored junior engineers, providing guidance in best practices and fostering professional growth opportunities.
UAV Engineer
Tata Advanced System Pvt.Ltd
10.2015 - 01.2017
- Tested systems developed by Aurora Integrated Systems, including Aquilion, Sky-high, and Multirotor
- Transitioned from UAV integration to larger systems, enhancing skills in advanced technologies
- Led development of Hybrid UAV from concept to execution, achieving successful outcomes
- Spearheaded Multirotor development using Aurora Autopilot, overcoming initial coding challenges
- Managed integration and testing of avionic components, ensuring minimal system failures as pilot
- Utilized Catia and Solidworks for design tasks while drafting in AutoCAD during downtime
- Established strong working relationships with clients through exceptional communication skills, fostering trust and collaboration
Education
B.Tech. - Mechanical Engineering
Lovely Professional University
01.2014
12th - undefined
Narayana college
01.2010
10th - undefined
Margadarsi E.M School
01.2008
Skills
- RC Flying 10 Years’ Experience
- System engineering
- Hardware and software installation
- Troubleshooting
- Project management
- Incident management
- Systems analysis
- Hardware configuration
- Data analysis
- Technical analysis
- Risk management
- Performance optimization & Technical support
Languages
English
Hindi
Tamil
Telugu
Kanada
Accomplishments
- During Corona Period was doing surveillance for forest department and got recognized by Mr.Sidram IFS and provided appreciation letter.
- UAV Instructing recognized at Bajaj Plant (Aurangabad) & Punjab Police.
RC Flying - Hobby
- Skilled in RC flying across diverse UAV platforms, including multirotors, fixed-wing aircraft, and hybrid VTOL systems, with strong proficiency in manual, stabilized, and assisted flight modes.
- Extensive FPV flying experience, both in line-of-sight (LOS) and first-person view (FPV), using analog and digital transmission systems, enabling high-agility maneuvers, precision landings, and long-range missions.
- Experienced in handling RC aircraft under varied environmental conditions, including high-altitude flights, wind handling, emergency recovery techniques, and safe takeoff/landing protocols across platforms.
Timeline
System Engineer - R&D
Resource Indiustries
10.2024 - Current
Manager-System engineering
Flyingwedge Defence & Aerospace PVT LTD
02.2024 - 09.2024
Zonal Manager-Operations
General Aeronautics Private Limited
03.2023 - 01.2024
Sr. Flight Test Engineer / Sr. Engineer
General Aeronautics Private Limited
11.2020 - 03.2023
Sr. Engineer
Asteria Aerospace Private Limited
04.2017 - 10.2020
UAV Engineer
Tata Advanced System Pvt.Ltd
10.2015 - 01.2017
12th - undefined
Narayana college
10th - undefined
Margadarsi E.M School
B.Tech. - Mechanical Engineering
Lovely Professional University
Similar Profiles
Hagen LosaHagen Losa
Warehouse Apprentice at Drilling & Production Resource (DPR)Warehouse Apprentice at Drilling & Production Resource (DPR)
Eamon DarrouxEamon Darroux
Senior Technology Support Associate at C.O.R.E Centre of Resource Excellence Inc.Senior Technology Support Associate at C.O.R.E Centre of Resource Excellence Inc.
Brianna ParraBrianna Parra
Child Care Provider at Child Care Resource Center (CCRC)Child Care Provider at Child Care Resource Center (CCRC)