Muhammad waseem
Al Qouz 1, Dubai
Summary
To obtain position as General Maintenance Technician CUM Driver. A challenging position that will utilize my skills and experience in a company for growth and advancement. An entry level position in a progressive organization in which acquired skills and abilities will be utilized.
Overview
8
8
years of professional experience
Work History
MEP Technician
OCTOPUS MEP TECHNICAL SERVICES
DIP, Dubai
03.2023 - Current
- Performed troubleshooting and diagnosis on malfunctioning equipment.
- Cleaned stains from fabric or garments using spray guns and cleaning fluid.
- Followed established procedures for inspection of belts, drives and motors, performing needed maintenance.
- Researched and implemented new technologies and equipment.
- Tended to machines, troubleshot malfunctions and completed basic repairs to keep equipment fully functional and well-maintained.
- Demonstrated to customers proper methods for operating equipment after it had been installed.
- Completed preventive maintenance on machines to enhance production and maintain quality.
- Measured and hemmed curtains, garments, and canvas coverings to size using tape measures.
- Trimmed cut or torn fabric using scissors or knives and stitched trimmed edges together.
- Liaised with internal departments to optimize productivity and efficiency.
- Diagnosed and repaired problems with electrical and mechanical systems.
- Checked, repaired and repacked survival equipment to meet specifications.
- Sewed fringe, tassels and ruffles onto drapes and curtains and buttons and trimming onto garments.
- Execute plans of electrical wiring for well-functioning lightning, intercom and other electrical system
- Install safety and distribution components (Switches, Resistors, circuit breaker and etc.)
- Installing, Maintaining and Repairing plumbing system and fixtures.
- Installing, Maintaining heating systems, Fitting bathrooms and Repairing of Sanitation system
- Repair or replace defective parts in unit and equipment and their controls like thermostat, automatic switches, fan controls, compressor and etc.
- Inspect and tested system to verify systems compliance with plans and detected malfunctions during and after final installation.
- Plans, monitors, installs and adjusts the full range of heating, cooling, ventilation, and refrigeration equipment by means of an energy management system hands-on work
- Commissioning & trouble shooting and Maintenance FCU, Package, DX, Split and Window type Unit
- Reporting to the Office about day to day operations of Site
- Preparing daily work completion reports and sending to the head office
- Maintaining Company’s Standard Operation Procedure
- Supervision of pre commissioning and commissioning activities of technicians
MEP Technician
THE HOME TEAM TECHNICAL SERVICES LLC
Al Safa, Dubai
11.2021 - 12.2023
- Performed troubleshooting and diagnosis on malfunctioning equipment.
- Cleaned stains from fabric or garments using spray guns and cleaning fluid.
- Followed established procedures for inspection of belts, drives and motors, performing needed maintenance.
- Researched and implemented new technologies and equipment.
- Tended to machines, troubleshot malfunctions and completed basic repairs to keep equipment fully functional and well-maintained.
- Demonstrated to customers proper methods for operating equipment after it had been installed.
- Diagnosed and repaired problems with electrical and mechanical systems.
- Execute plans of electrical wiring for well-functioning lightning, intercom and other electrical system
- Install safety and distribution components (Switches, Resistors, circuit breaker and etc.)
- Installing, Maintaining and Repairing plumbing system and fixtures.
- Installing, Maintaining heating systems, Fitting bathrooms and Repairing of Sanitation system
- Repair or replace defective parts in unit and equipment and their controls like thermostat, automatic switches, fan controls, compressor and etc.
- Inspect and tested system to verify systems compliance with plans and detected malfunctions during and after final installation.
- Tested systems, noting issues and completing preventive maintenance.
- Inspected, evaluated and calibrated electrical and mechanical systems and components.
- Patched holes, sewed tears and ripped seams or darned defects using needles and thread or sewing machines.
- Plans, monitors, installs and adjusts the full range of heating, cooling, ventilation, and refrigeration equipment by means of an energy management system hands-on work
- Commissioning & trouble shooting and Maintenance FCU, Package, DX, Split and Window type Unit
Electrician
AL RAMS PRIME CONSTRUCTION
Dubai, United Arab Emirates
05.2019 - 10.2021
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Stored and maintained power tools and equipment for each job.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
- Troubleshot and repaired malfunctioning systems and components.
- Managed business report generation, recordkeeping and supply ordering.
- Installed 120/208 volt systems and 347/600 volt systems.
- Fabricated custom and replacement parts according to specifications, using hand tools.
Electrician
SAHABH KHAIR TECHNICAL SERVICES LLC
Dubai, United Arab Emirates
01.2017 - 04.2019
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Stored and maintained power tools and equipment for each job.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
Education
Bachelor of Science - Electrical Engineering
Diploma in Electrical Engineering-Punjab Board Tec
MultanHigh School Diploma -
Multan Board of Secondary School
MultanSkills
- Commercial construction experience
- Machinery calibration
- Customer interaction
- Project Support
- Minor Carpentry
- User training
- Troubleshooting
- Hardware installation
- Equipment operation
- Written/Verbal communication
- Quality control
- System installation
- System upgrades
- Production scheduling
- Power Tools and Equipment
- Operations monitoring
- Troubleshooting and Diagnostics
- Problem-solving
- Maintenance and repair
- Maintenance and repairs
- General Plumbing
- Mechanical Knowledge
Languages
Urdu
Advanced (C1)
English
Advanced (C1)
Timeline
MEP Technician
OCTOPUS MEP TECHNICAL SERVICES
03.2023 - Current
MEP Technician
THE HOME TEAM TECHNICAL SERVICES LLC
11.2021 - 12.2023
Electrician
AL RAMS PRIME CONSTRUCTION
05.2019 - 10.2021
Electrician
SAHABH KHAIR TECHNICAL SERVICES LLC
01.2017 - 04.2019
Bachelor of Science - Electrical Engineering
Diploma in Electrical Engineering-Punjab Board Tec
High School Diploma -
Multan Board of Secondary School